Design maintains standard seat geometry and heights that integrate with typical dining tables and counters used in restaurants, cafeterias, and hospitality spaces. Manufacturers adhere to recognized standards and the chair accepts routine inspection and repair protocols to extend service life.
LongDescription#@#NA#@@#Cleaning Instructions#@#Wipe wood slat back and beechwood seat with a microfiber cloth and mild detergent solution; rinse cloth in clean water and dry surfaces immediately. Sanitize high-touch zones—chair backs and edges—using an EPA-listed sanitizer per label dwell time. Inspect hardware weekly and tighten loose fasteners. Clean spills promptly to prevent staining and material degradation. Regular cleaning prevents cross-contamination, deters pests, preserves finish, and supports health-code compliance.#@@#Additional Info#@#Flash Furniture XU-DGW0008VRT-WAL-GG chair has a .62" thick beechwood seat, vertical slat back, and walnut finish on a solid wood frame. It supports commercial use at 17 lbs, 16.75" width, 20.75" depth, and 34.5" height; CSA not listed.#@@#General Info#@#Description #@#
Design maintains standard seat geometry and heights that integrate with typical dining tables and counters used in restaurants, cafeterias, and hospitality spaces. Manufacturers adhere to recognized standards and the chair accepts routine inspection and repair protocols to extend service life.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect joints and fasteners weekly for looseness in the Flash Furniture XU-DGW0008VRT-WAL-GG Vertical Wood Slat Back .62" chair; tighten No. 8 wood screws to 20–25 in·lbs and recheck after 24 hours. Clean walnut finish with a pH-neutral wood cleaner using a soft cloth and buff dry. Sand surface blemishes with 220-grit, remove dust, and refinish with compatible polyurethane. Check leg glides for wear and replace if height loss exceeds 1/8 inch.
