The stainless steel construction and lever handles afford corrosion resistance and intuitive operation under heavy use. Technicians access compression valves and replaceable aerators with minimal disassembly, preserving service intervals and extending component life.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug nearby equipment and shut water at the valve. Remove aerator and soak in mild detergent for 10 minutes, then scrub with a soft brush. Wipe stainless steel spout and deck with a non-abrasive cleaner and soft cloth; rinse and dry to prevent corrosion. Flush lines for 30 seconds after reconnection. Clean compression valves by operating handles fully open and closed; check seals and replace if worn. Maintain coil and vent cleanliness to reduce energy use and fire risk.#@@#Additional Info#@#Component Hardware KL57-4002-RE1 faucet has a 6" stainless steel gooseneck spout, 4" OC inlets, 1/4-turn valves, 2.2 gpm aerated stream, low lead compliant, CSA and NSF certified, ADA compliant, and weighs 5 pounds.#@@#General Info#@#Description #@#
The stainless steel construction and lever handles afford corrosion resistance and intuitive operation under heavy use. Technicians access compression valves and replaceable aerators with minimal disassembly, preserving service intervals and extending component life.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the Component Hardware KL57-4002-RE1 faucet weekly for leaks and mineral buildup. Remove the aerator monthly and soak it in a 1:1 vinegar and water solution to dissolve scale; rinse and reinstall. Operate both compression valves fully several times to prevent seizure. Wipe stainless surfaces with a soft cloth and neutral detergent; avoid abrasive pads and chlorinated cleaners. Check deck mount fasteners and re-torque as needed. Flush lines after extended idle periods to clear sediment.
