Built to organize heavy loads in fast-paced kitchens, this mobile starter unit combines durable polymers with a steel core to deliver consistent performance and reduced maintenance. Designed for institutional use, the unit accepts up to 750 pounds distributed across four vented shelf plates and moves easily on premium swivel casters with a total locking brake system. NSF certification and Camguard antimicrobial protection on shelf surfaces support sanitation protocols required by hospitals, schools, and food service operations.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment before cleaning. Remove loose debris and dust from shelves and posts with a soft brush. Wipe shelf plates and exterior with a mild detergent; rinse and dry thoroughly. Clean casters and traverses, removing grease and particles. Inspect seals, fasteners, and connectors; tighten or replace as needed. Perform weekly deep clean to reduce bacteria, prevent fires, lower energy use, and ensure CSA and NSF compliance.#@@#Additional Info#@#Cambro CPMU214267V4480 mobile starter unit is 42" W x 21" D x 67" H. It has four vented polypropylene shelves with Camguard, steel posts, premium swivel casters, NSF certification, 750 lbs capacity, and -36°F to 190°F tolerance.#@@#General Info#@#Description #@#
Built to organize heavy loads in fast-paced kitchens, this mobile starter unit combines durable polymers with a steel core to deliver consistent performance and reduced maintenance. Designed for institutional use, the unit accepts up to 750 pounds distributed across four vented shelf plates and moves easily on premium swivel casters with a total locking brake system. NSF certification and Camguard antimicrobial protection on shelf surfaces support sanitation protocols required by hospitals, schools, and food service operations.
#@@# Vented Shelf Plates#@#
Four vented polypropylene plates provide airflow that aids temperature control and drainage in cold storage or heated prep areas. The surfaces are treated with Camguard antimicrobial protection to inhibit microbial growth and simplify sanitation workflows.
#@@# Robust Structural Posts#@#
Steel posts with a polypropylene exterior provide tensile strength while resisting corrosion in humid or refrigerated environments. Molded dovetails and pre-assembled post kits ensure consistent shelf alignment and rapid installation.
#@@# Heavy Duty Mobility#@#
Four premium swivel casters enable confident repositioning across service areas and storage rooms, while the total locking brake secures the unit during loading and unloading. Users gain flexibility to stage the unit for deliveries, prep, or cleaning without sacrificing stability.
#@@# Temperature Performance#@#
Materials function across a wide range from -36°F (-38°C) to 190°F (88°C), allowing safe use in freezers, walk-in coolers, and near heated equipment. Polypropylene is selected to maintain dimensional stability and resist thermal shock across routine service cycles.
#@@# Load Capacity Design#@#
Engineers rated the unit for a maximum capacity of 750 pounds, supporting bulk storage of trays, containers, and dry goods while maintaining caster and shelf integrity. The layout optimizes space with a 42-inch width and 21-inch depth footprint to fit common service aisles.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect casters weekly and tighten mounting hardware to maintain mobility and prevent floor damage. Clean vented polypropylene shelves with a neutral detergent and warm water; rinse thoroughly and air dry to preserve Camguard antimicrobial protection. Sanitize posts and traverses using EPA-approved agents compatible with polypropylene and steel exteriors. Verify total locking brakes function and test load distribution under 750 pounds to avoid overload and rack deformation.
