Unit measures 60.19 inches wide, 64.38 inches high, and 46.5 inches deep with 12 inch stainless steel legs and a crown angle leg frame for stability. Planners allocate floor space efficiently and confirm natural gas supply specifications prior to installation.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug and shut gas at the valve. Remove racks and sweep crumbs from decks. Mix mild detergent with warm water (avoid abrasive pads). Scrub Rokite deck surfaces with a nonmetal brush; wipe doors, exterior stainless steel, and control knobs with soft cloth. Rinse thoroughly and dry to prevent corrosion. Clean flue and vents monthly to remove grease and cut fire risk. Inspect seals and legs; tighten fasteners. Follow CSA and NSF guidelines for food safety and inspections.#@@#Additional Info#@#Blodgett’s 1048 DOUBLE-NG features two 48" deck chambers with QHT Rokite decks, spring-assist doors, 85,000 BTU per deck, mechanical thermostats, stainless steel exterior, 12" legs, cETLus/NSF/CE certifications, and natural gas operation.#@@#General Info#@#Description #@#
Unit measures 60.19 inches wide, 64.38 inches high, and 46.5 inches deep with 12 inch stainless steel legs and a crown angle leg frame for stability. Planners allocate floor space efficiently and confirm natural gas supply specifications prior to installation.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the Blodgett 1048 DOUBLE-NG by inspecting burners and pilot assemblies monthly, removing debris for consistent ignition. Clean QHT Rokite decks after each shift with a scraper and wire brush; sweep and vacuum before cooling. Lubricate door springs and check concealed hinges quarterly; tighten fasteners to maintain seal integrity. Verify gas connections and flue connector for leaks with approved detector fluid; replace faulty valves.