Stop sacrificing control for convenience. This electric heated industrial air curtain provides consistent thermal separation and continuous operation for high-traffic openings, supporting interior climate control and pest mitigation without disrupting service. Designed for interior mounting over doors up to 12 feet high, the unit balances airflow, heat output, and motor reliability for demanding commercial environments.
LongDescription#@#NA#@@#Cleaning Instructions#@#Wipe housing and inlet screen with a mild detergent and warm water; rinse and dry. Sanitize high-touch controls and surrounding door frames with an EPA-registered disinfectant following dwell time. Inspect mounting hardware and motor access panels monthly; tighten fasteners and remove debris. Vacuum fan inlet screens quarterly to prevent buildup. Regular cleaning prevents cross-contamination of clean items and hands, supports health-code compliance, deters pests, and preserves furnishings.#@@#Additional Info#@#Berner IDC12-4144E is a 144" electric heated air curtain with four 1/2 HP motors for interior mounting, rated 208 volts, 3-Ph, 56 kW, cULus certified, for doors up to 12 ft, providing environmental separation and insect protection.#@@#General Info#@#Description #@#
Stop sacrificing control for convenience. This electric heated industrial air curtain provides consistent thermal separation and continuous operation for high-traffic openings, supporting interior climate control and pest mitigation without disrupting service. Designed for interior mounting over doors up to 12 feet high, the unit balances airflow, heat output, and motor reliability for demanding commercial environments.
#@@# Motor Configuration.#@#
Four 1/2 HP direct drive motors ensure redundant airflow and minimize downtime risk through distributed load. Each motor operates on a single-speed setting to maintain a stable air profile across the full 144-inch span, enabling effective separation for openings up to 12 feet in height.
#@@# Electric Heat Output.#@#
The unit delivers 56 kW of electric heat to sustain temperature differentials at entrance points during frequent door cycles. Built for continuous duty, the heating system supports environmental separation for climate control and helps limit the infiltration of unconditioned air.
#@@# Interior Mounting Design.#@#
Engineers optimized the housing for interior mounting to integrate seamlessly with typical commercial door headers and vestibules. Fabrication meets commercial installation tolerances, and the inlet screening protects internal components from large debris without obstructing airflow.
#@@# Compliance and Certification.#@#
The assembly carries cULus certification and operates on 208 volts, 60 hertz, 3-Ph electrical service to align with commercial utility distributions. Specifying a compliant, certified unit simplifies permitting and reduces inspection friction for institutional installations.
#@@# Coverage and Dimensions.#@#
The curtain spans 144 inches in width and suits openings designated for 12 feet of environmental separation and 10 feet of insect control, providing extensive coverage for large entrances.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the IDC12-4144E air curtain monthly for accumulated dust on the inlet screen and housing; remove debris with a vacuum and soft brush to maintain airflow. Tighten motor mounts and fan blades quarterly, and verify electrical connections at 208 volts and 3-Ph terminals for corrosion or looseness. Replace worn seals to preserve environmental separation. Test heat elements under rated 56 kW load and confirm CSA/cULus markings. Log maintenance and service dates for compliance.
