Weighing approximately 2.1 pounds with a 2 inch width and 23 inch height dimension, this plunger offers a robust profile for commercial fry lines. Installers appreciate the tangible heft for secure handling while adapting to existing depositor geometry.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug and cool the depositor. Remove the Belshaw 7G-1000-103DB plunger and submerge in warm water with a food-safe detergent. Scrub 3 holes and 2" diameter surfaces with a soft brush to remove batter and grease. Rinse in potable water and air dry. Inspect seals and cylinder fit; replace worn parts. Clean after each shift to prevent bacterial buildup, reduce fire risk from grease, lower energy use, and ensure CSA inspection readiness.#@@#Additional Info#@#Belshaw 7G-1000-103DB plunger fits Type B and F depositors, has a 2" diameter with three 7/8" discharge holes, needs matching cylinders and a submerger, weighs 2.1 pounds, and is for donut and hushpuppy production, shipping from a USA manufacturer.#@@#General Info#@#Description #@#
Weighing approximately 2.1 pounds with a 2 inch width and 23 inch height dimension, this plunger offers a robust profile for commercial fry lines. Installers appreciate the tangible heft for secure handling while adapting to existing depositor geometry.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the Belshaw 7G-1000-103DB plunger for wear and deformation to ensure deposit accuracy. Replace any plunger with burrs or pitting to avoid product buildup. Clean the 2" plunger and three 7/8" holes after each run with food-safe detergent and a soft brush; rinse in potable water and sanitize per protocol. Lubricate moving parts with NSF H1-approved lubricant to prevent contamination. Verify each plunger matches the cylinder size before installation.
