Stop compromising capacity for control. This indoor walk-in freezer delivers consistent low-temperature performance and robust construction to support high-throughput foodservice operations while maintaining easy access for staff.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the unit and remove contents. Mix mild detergent with warm water; wipe interior panels and aluminum floor, then rinse and dry. Clean door gasket, check for wear, tighten hinges, and test the self-closing door. Vacuum condenser area and remove debris from vents. Sanitize food-contact surfaces with approved solution and record the cleaning date. Regular cleaning prevents bacteria, reduces fire risk from grease, lowers utility use, and extends equipment life.#@@#Additional Info#@#The AmeriKooler QF061077**F indoor walk-in freezer measures 120" W x 72" D x 91" H and uses 4" AK-XPS4 panels for R-32 insulation; NSF aluminum floor supports 600 lbs/sq. ft., with a digital LED thermometer and self-closing door.#@@#General Info#@#Description #@#
Stop compromising capacity for control. This indoor walk-in freezer delivers consistent low-temperature performance and robust construction to support high-throughput foodservice operations while maintaining easy access for staff.
The unit uses 4” AK-XPS4 insulation that provides R-32 for freezers, ensuring thermal stability and reduced energy cycling. Operators will see tighter temperature control and lower compressor run time, which helps contain operating costs.
All interior and exterior surfaces use 26 gauge stucco embossed acrylic-coated Acrylume to resist corrosion in humid kitchen environments. Maintenance crews will perform routine cleaning with minimal risk of surface degradation, extending service life.
The NSF aluminum floor rates at 600 pounds per square foot uniformly distributed load, supporting heavy racks and pallet traffic. Kitchen planners can stage high-volume storage and movement without reinforcing floor structure.
A flush self-closing door with super cam-rise spring assisted hinges and door closer provides reliable sealing and reduces infiltration during busy service periods. Staff will experience faster pass-through times while the chamber maintains setpoint temperatures.
A digital LED thermometer with pilot light switch gives visible temperature status at a glance for compliance and daily checks. Managers can verify conditions quickly for audits and HACCP documentation.
The modular assembly meets UL and CSA recognition and ships as indoor panels with floor included, made in USA. Procurement teams receive a pre-engineered solution that aligns with commercial codes and simplifies project planning.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect condenser coils monthly; remove dust with a soft brush or vacuum to maintain efficiency. Clean interior panels and NSF aluminum floor with mild detergent and rinse; allow to dry before returning product. Verify door hinges, cam-rise spring assist, and closer for alignment; lubricate pivot points with food-grade lubricant quarterly. Test digital LED thermometer and pilot light switch weekly; recalibrate if readings deviate. Check door gasket for wear; replace when compression fails.