The modular panel construction supports quick indoor installation and straightforward configuration for a 6 foot by 6 foot footprint with 7 foot 7 inch height. Project teams can integrate the unit as a walk-in freezer box without selecting a refrigeration system, simplifying procurement and timeline planning.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment before cleaning. Remove food and debris; scrape solids into a waste container. Use a non-abrasive detergent solution and a soft cloth or nylon brush to clean interior panels, door seals, and floor. Rinse with potable water and dry completely to prevent corrosion. Clean condenser coils and vents monthly to improve efficiency and reduce fire risk. Inspect seals and hinges; replace worn parts. Follow CSA and UL guidelines for safe maintenance.#@@#Additional Info#@#AmeriKooler QF060677**F indoor walk-in freezer is 72" W x 72" D x 91" H with 4" AK-XPS4 panels for R-32 insulation. It has a 600 lb/sq ft aluminum floor, 26-gauge Acrylume, digital LED thermometer, and a self-closing door. UL listed, made in USA.#@@#General Info#@#Description #@#
The modular panel construction supports quick indoor installation and straightforward configuration for a 6 foot by 6 foot footprint with 7 foot 7 inch height. Project teams can integrate the unit as a walk-in freezer box without selecting a refrigeration system, simplifying procurement and timeline planning.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect condenser coils monthly and remove dust with a soft brush to maintain thermal transfer. Clean interior surfaces with a neutral pH detergent and warm water; rinse and dry to prevent corrosion. Verify door gasket integrity and replace any cracked seals to maintain negative pressure. Level the unit and confirm floor anchoring to avoid stress on panels. Calibrate the digital LED thermometer quarterly and document readings for compliance with CSA and UL standards.