Stop sacrificing capacity for control. This indoor acrylume combination cooler/freezer delivers precise temperature splits and robust refrigeration performance for high-volume kitchens, cafeterias, hospitals, and hospitality operations. Designed for continuous use, it combines a 50/50 cooler and freezer layout with factory-matched refrigeration and integrated controls to maintain product integrity under heavy load.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the unit and remove food. Mix mild detergent with warm water (use gallons or liters as needed) and scrub interior surfaces with a soft cloth. Clean condenser coils and evaporator fins to improve efficiency and lower bills. Degrease ovens and vents to prevent fires. Rinse and dry all parts; ensure seals stay intact and replace when worn. Sanitize food-contact surfaces to stop sickness and pass CSA inspections. Schedule regular cleaning to avoid breakdowns.#@@#Additional Info#@#American Panel's 6X12-I indoor walk-in cooler/freezer measures 139" W x 90" H with a 50/50 split, acrylume interior/exterior, and 4" urethane floor panels.#@@#General Info#@#Description #@#
Stop sacrificing capacity for control. This indoor acrylume combination cooler/freezer delivers precise temperature splits and robust refrigeration performance for high-volume kitchens, cafeterias, hospitals, and hospitality operations. Designed for continuous use, it combines a 50/50 cooler and freezer layout with factory-matched refrigeration and integrated controls to maintain product integrity under heavy load.
#@@# Split Temperature#@#
Configure cooler and freezer zones with independent setpoints to match storage needs. The unit provides a medium temperature 35° F cooler paired with a low temperature -10° F freezer, enabling simultaneous storage of perishable and frozen goods without cross-impact.
#@@# Integrated Refrigeration#@#
R-448a hermetic pre-charged top quick-connect refrigeration systems simplify installation and start-up. The freezer uses a 1 HP condensing circuit on 208v/60/1-ph while the cooler uses a 1/2 HP condensing circuit on 115v/60/1-ph, providing dedicated capacity for each zone.
#@@# Floor Options#@#
Choose foamed-in-place 4" urethane floor panels in the freezer and floorless installation on a vinyl screed in the cooler. This arrangement supports heavy loads in the freezer while allowing easier sanitation and drain access in the cooler zone.
#@@# Durable Construction#@#
Specify acrylume interior and exterior panels for corrosion resistance and cleanability in demanding environments. The hinged door with camlift hinges reduces sagging and maintains a consistent seal through repeated cycles.
#@@# Controls And Safety#@#
Rely on an Intelligent Controller and Heatcraft Quick Response Controller for responsive refrigeration management. The system includes vapor-proof lighting and heaters for evaporator coils, plus monitored amperage ratings to protect compressors and fans.
#@@# Service And Ratings#@#
Expect clearly defined electrical loads for planning and compliance.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect condenser coils monthly; remove dust with a soft brush and low-pressure vacuum for efficiency. Clean interior surfaces weekly with mild detergent and warm water; rinse and dry to prevent corrosion on panels. Verify door camlift hinges and seals daily; tighten hardware and replace worn gaskets to maintain temperature. Monitor refrigerant pressures and check electrical connections quarterly; document findings for CSA compliance.