Advance Tabco’s 36" x 30" stainless work table delivers durable, code-compliant support for busy commercial kitchens while maximizing usable prep surface and undercounter access. Engineered with a 16-gauge Type 430 stainless steel top and a stainless steel open base with side and rear crossrails, this work table provides stable, NSF-certified performance for routine food-prep, plating, and staging tasks.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the table and clear the surface. Wipe the stainless steel top with mild detergent and a soft cloth, rinsing thoroughly. Clean legs, crossrails, and feet with non-abrasive cleaner to remove grease. Wash edges and undersides, then dry to prevent spots. Inspect and tighten adjustable feet. Regular cleaning prevents contamination, reduces fire risk, lowers energy use, and aids inspections.#@@#Additional Info#@#Advance Tabco TSLAG-303-X stainless steel work table, 36" x 30", 16 gauge Type 430 top, open base, crossrails, bullnose edge, adjustable bullet feet, NSF certified, 62 lbs.#@@#General Info#@#Description #@#
Advance Tabco’s 36" x 30" stainless work table delivers durable, code-compliant support for busy commercial kitchens while maximizing usable prep surface and undercounter access. Engineered with a 16-gauge Type 430 stainless steel top and a stainless steel open base with side and rear crossrails, this work table provides stable, NSF-certified performance for routine food-prep, plating, and staging tasks.
#@@# Stainless Top#@#
The 16-gauge Type 430 stainless steel top resists corrosion and stands up to frequent cleaning cycles. It provides a flat, sanitary surface that supports heavy prep loads while maintaining an even work plane.
#@@# Open Base Design#@#
An open base with side and rear crossrails offers unhindered access for storage and cleaning while preserving structural integrity. Staff can position undercounter carts or small equipment without obstructing legroom or workflow.
#@@# Rounded Edge#@#
A rounded, rolled bullnose edge reduces sharp contact points and improves comfort during extended prep periods. The edge profile also channels liquids away from the work face to simplify wipe-downs.
#@@# Adjustable Feet#@#
Stainless steel adjustable bullet feet allow precise leveling on uneven floors to ensure stability and maintain sanitary seals against floor gaps. Technicians can adjust each foot without removing the table from service.
#@@# Stainless Base#@#
A fully stainless steel base resists oxidation in humid or wet kitchen environments and aligns with sanitation protocols. The base construction supports consistent load distribution for heavy pans and equipment.
#@@# NSF Certification#@#
NSF certification confirms the table meets health and safety standards for commercial foodservice operations. Operators benefit from documented compliance during inspections and routine audits.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Address the reader formally and provide maintenance guidance for the Advance Tabco TSLAG-303-X work table. Clean the 16 gauge Type 430 stainless steel top daily with mild detergent and warm water; dry with a soft cloth. Sanitize with food-safe sanitizer per manufacturer dwell times. Inspect bullnose edge and welds weekly for wear or corrosion. Tighten leg fasteners monthly. Level with adjustable feet as needed. Avoid abrasive pads or chlorine cleaners. Replace worn components promptly.