The set ships at a listed total weight of 28 pounds, allowing simple handling during inventory and installation while providing sufficient mass to support heavy racking. Staff can stage multiple sets without specialized lifting equipment.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment and remove loose debris. Use a mild detergent solution and a soft cloth to clean surfaces that contact food; rinse and air dry. Degrease ovens and vents with a commercial oven cleaner, scrub deposits from fans, and wipe filters. Vacuum condenser coils and wash shelves with warm, soapy water. Inspect seals and caster mounts (Advance Tabco TA-25S-6-X) and tighten hardware. Schedule regular cleaning to prevent contamination, fires, higher bills, and equipment failure.#@@#Additional Info#@#Advance Tabco TA-25S-6-X casters have six 5" wheels, two with brakes, stainless steel, and NSF certified. They support 35-1/2" equipment, weigh 28 pounds per set, and install on existing legs for mobility and secure positioning.#@@#General Info#@#Description #@#
The set ships at a listed total weight of 28 pounds, allowing simple handling during inventory and installation while providing sufficient mass to support heavy racking. Staff can stage multiple sets without specialized lifting equipment.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Install the Advance Tabco TA-25S-6-X casters following manufacturer torque and stem seating specifications to ensure secure attachment to 35-1/2" stainless legs. Inspect wheel bearings weekly; lubricate with food-grade grease every 3 months. Verify brake function on two units monthly and replace worn components immediately. Clean wheels and stem interfaces with neutral detergent and hot water; dry thoroughly to prevent corrosion and maintain load capacity.