At 108" overall width with model width specified as 108, the shield covers broad service lines without seams that interrupt the protected zone. Large kitchens and buffet lines gain continuous protection across extended prep and service runs without frequent repositioning.
LongDescription#@#NA#@@#Cleaning Instructions#@#Wipe tempered glass and stainless frame with a soft cloth and mild detergent solution, then rinse with clean water and dry to prevent streaks. Sanitize high-touch zones (menu holders, handles, chair backs) with an EPA-registered disinfectant following contact-time instructions to reduce Norovirus and cold-virus transfer. Remove crumbs and spills under stations to deter pests and protect finishes. Inspect seals and fasteners weekly and tighten as needed.#@@#Additional Info#@#Advance Tabco SGCC-108 stainless steel food shield spans 108" and uses 3/8" heat-tempered glass front with 1/4" side panels; meets NSF criteria, requires side shields for stability, and supports full-service salad bar use.#@@#General Info#@#Description #@#
At 108" overall width with model width specified as 108, the shield covers broad service lines without seams that interrupt the protected zone. Large kitchens and buffet lines gain continuous protection across extended prep and service runs without frequent repositioning.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the Advance Tabco SGCC-108 vertical food shield by inspecting tempered glass for chips and replacing damaged panels immediately. Clean glass with a non-abrasive, pH-neutral cleaner after each service and sanitize frames with approved disinfectant daily. Verify posts and side shields for secure anchoring and tighten fasteners weekly. Confirm bottom panel clearance remains under 6 inches and glass top height at least 60 inches above floor to preserve NSF compliance.
