Weighing approximately 4 pounds, the caster balances robustness with manageable handling during installation and replacement. Procurement specialists will note that the unit supports heavy loads while remaining compact enough for rapid field service.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment before cleaning. Remove the caster and wipe wheel and plate with a lint-free cloth and mild detergent to remove grease and debris. Apply a small amount of CSA-approved lubricant into the Zerk grease fitting and cycle the wheel to distribute. Inspect bearings and fasteners; tighten as needed. Clean surrounding oven surfaces to prevent grease buildup that raises fire risk and causes breakdowns. Reinstall caster and test rotation before returning unit to service.#@@#Additional Info#@#Advance Tabco RA-40 plate caster fits 4" Hi-Temp oven wheels, mounts with a standard plate, has a Zerk grease fitting, supports heavy-duty kitchen equipment, weighs 4 pounds, meets CSA certification, and serves commercial foodservice repair needs.#@@#General Info#@#Description #@#
Weighing approximately 4 pounds, the caster balances robustness with manageable handling during installation and replacement. Procurement specialists will note that the unit supports heavy loads while remaining compact enough for rapid field service.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the Advance Tabco RA-40 caster weekly and tighten all fasteners for secure attachment. Clean the Hi-Temp oven wheel with a compatible solvent and remove debris that impairs rotation. Apply grease through the Zerk fitting until lubricant appears at the bearing seal; lubricate monthly under heavy use. Check wheel diameter and tread for flat spots; replace if wear exceeds 10% of the original diameter. Verify load capacity and ensure installation hardware meets CSA requirements.
