Upgrade foodshield lighting with a purpose-built LED unit that balances consistent color temperature and low energy draw for high-use service lines. This 36-inch aluminum-finished fixture delivers 3500K warm white illumination across stainless tops for clear product visibility while minimizing heat load. Installers appreciate the remote low-voltage transformer, which simplifies undercounter placement and keeps wiring accessible for service.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug power before servicing the LED-S-36. Remove clips and lift light from under the stainless top. Wipe housing and lens with a soft cloth and mild detergent; avoid abrasives. Rinse with clean water and dry fully. Inspect the low-voltage transformer for dust; vacuum vents and tighten connections. Check seals and replace damaged gaskets. Reconnect power and verify 3500k output. Regular cleaning prevents bacteria, fire hazards, higher bills, equipment wear, and failed inspections.#@@#Additional Info#@#Advance Tabco LED-S-36 offers 36" of 3500K warm white LED light for stainless-top food shields 48" and longer.#@@#General Info#@#Description #@#
Upgrade foodshield lighting with a purpose-built LED unit that balances consistent color temperature and low energy draw for high-use service lines. This 36-inch aluminum-finished fixture delivers 3500K warm white illumination across stainless tops for clear product visibility while minimizing heat load. Installers appreciate the remote low-voltage transformer, which simplifies undercounter placement and keeps wiring accessible for service.
#@@# Lighting Coverage#@#
Installers position the fixture for stainless-top food shields 48 inches wide and longer to achieve uniform illumination across service lines. The 3500K color temperature produces neutral warm white light that enhances product appearance and reduces color shifts common with older lamps.
#@@# Power Requirements#@#
Specify 120V or 277V supply to match facility electrical systems while the unit draws 5.0 amps through the provided transformer. Facility managers benefit from reduced retrofit complexity because the transformer mounts remotely under the counter and connects with low-voltage cabling.
#@@# Mounting Design#@#
Attach the lighting using included mounting clips that secure under the stainless steel top for a flush appearance and simplified maintenance access. Technicians can quickly remove the fixture for cleaning or service without disturbing the shield structure.
#@@# Regulatory Compliance#@#
Rely on NSF and UL listings for foodservice environments, with factory installation recommended to maintain certifications and ensure correct LED placement. Facility teams uphold compliance by following the printed layout that accompanies the unit.
#@@# Finish Options#@#
Choose the standard aluminum finish to match stainless environments or request black or white finishes for specific decor requirements. Procurement teams can order finishes that align with long-term design plans to avoid mismatched components.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Service personnel must disconnect power and verify 120v/277v isolation before maintaining the Advance Tabco LED-S-36 lighting assembly. Inspect mounting clips and under-counter transformer monthly for corrosion or loose fasteners; tighten hardware to specified torque. Clean aluminum housing with nonabrasive detergent and a soft cloth; avoid solvents that damage finishes. Replace damaged LEDs or the low voltage transformer; recycle components per local CSA and UL guidelines.
