For high-use kitchens that require compact utility without compromising sanitation, this undermount sink provides a durable, code-compliant solution for prep stations, satellite sinks, and handwashing areas. The 304 stainless steel construction resists corrosion during continuous operation, while the 18-gauge thickness balances strength with manageable weight for retrofit installations. Designed for solid surface tops, the unit integrates flush with counters, simplifying cleaning and maintaining a professional appearance.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug any nearby power and clear the sink area. Use a mild detergent and warm water with a soft cloth to clean the 304 stainless steel bowl and 18 gauge trim. Rinse thoroughly and dry to prevent water spots. Clean the 3-1/2" drain opening and check seals for wear; replace if damaged. Remove grease from surrounding counters and under-mount surfaces to prevent fire risk and maintain appliance efficiency. Regular cleaning reduces contamination and equipment failures.#@@#Additional Info#@#Advance Tabco CO-1014A-10RE undermount sink has a 10" x 14" bowl, 10" deep, with a 3-1/2" drain. Made of 18 gauge 304 stainless steel, it features 12-1/2" x 16-1/2" O.D. trim and is NSFCertified for commercial kitchens.#@@#General Info#@#Description #@#
For high-use kitchens that require compact utility without compromising sanitation, this undermount sink provides a durable, code-compliant solution for prep stations, satellite sinks, and handwashing areas. The 304 stainless steel construction resists corrosion during continuous operation, while the 18-gauge thickness balances strength with manageable weight for retrofit installations. Designed for solid surface tops, the unit integrates flush with counters, simplifying cleaning and maintaining a professional appearance.
#@@# Bowl Dimensions#@#
The compartment measures 10 inches wide by 14 inches front-to-back and 10 inches deep, offering a usable volume that efficiently handles routine prep tasks and utensil washing in tight spaces. The 3-1/2 inch drain opening accommodates standard waste fittings, streamlining drainage for quicker turnarounds.
#@@# Undermount Fit#@#
Fabricated for undermount installation, the sink features a 12.5 by 16.5 inch outer trim that fits beneath solid surface countertops, minimizing exposed rim area. Installers receive consistent dimensional references for cutouts and mounting, reducing fitment errors during installation.
#@@# Material Specification#@#
Constructed from 304 stainless steel at 18-gauge thickness, the bowl resists pitting and staining in varied kitchen environments and supports routine sanitation protocols. Inspectors receive clearly specified metallurgy for HACCP and procurement documentation.
#@@# Sanitation Certification#@#
The unit carries NSF Certified designation, confirming compliance with health department requirements for foodservice equipment and qualifying it for use in regulated environments such as hospitals, schools, and commercial kitchens. Operators maintain inspection readiness with equipment that meets established sanitation standards.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the Advance Tabco CO-1014A-10RE undermount sink by cleaning daily with a pH-neutral detergent and soft cloth to prevent water spots and corrosion. Rinse thoroughly and dry surfaces after each shift. Inspect the 18 gauge 304 stainless steel for dents and weld integrity weekly; tighten mounting clips and seams as needed. Clear the 3-1/2" drain opening of debris and flush with hot water. Sanitize per facility protocol and document maintenance actions.
