Stop compromising on ventilation integrity when space and compliance matter. This ceiling-mounted condensate hood features robust stainless steel construction and engineered drainage to protect ceiling cavities and ductwork in commercial dishwashing environments. Installers will appreciate the simplified mounting features that reduce labor time, while facility managers gain a durable solution that meets NSF certification requirements.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug related equipment and drain standing liquid from the Advance Tabco CH-4242 before cleaning. Mix a mild detergent with warm water (use gallons or liters as needed) and scrub the stainless steel surfaces with a non-abrasive pad. Clear the inside bottom gutter and flush the 3/8" rear drain until debris exits. Inspect and clean the 8 x 10 exhaust opening; remove obstructions from the notched back mounting area. Rinse, wipe dry, and verify seals and mounts before reconnecting power.#@@#Additional Info#@#Advance Tabco CH-4242 ceiling-mounted condensate hood is 42" W x 42" D x 20.5" H, made of stainless steel with a bottom gutter and rear drain, features a back notch for 2x4 mounting and an 8" x 10" exhaust opening, CSA certified, 140 pounds.#@@#General Info#@#Description #@#
Stop compromising on ventilation integrity when space and compliance matter. This ceiling-mounted condensate hood features robust stainless steel construction and engineered drainage to protect ceiling cavities and ductwork in commercial dishwashing environments. Installers will appreciate the simplified mounting features that reduce labor time, while facility managers gain a durable solution that meets NSF certification requirements.
#@@# Top Drain Gutter#@#
A continuous inside bottom gutter directs condensate to a 3/8 inch drain at the rear, eliminating pooled water under the hood and reducing the risk of microbial growth. Technicians can quickly connect standard drain fittings, improving sanitation and lowering maintenance frequency.
#@@# Ceiling Mounting Notch#@#
Manufacturers pre-cut the back to accept a 2 x 4 support, streamlining attachment to overhead structures and ensuring secure suspension. Installers save time on framing and achieve consistent alignment across multiple units.
#@@# Exhaust Conduit Opening#@#
Engineers placed an 8 x 10 opening centered in the top to accept exhaust conduit while allowing field routing flexibility; conduit supply remains the responsibility of the contractor. Planners maintain system design control and adapt the hood to existing mechanical layouts.
#@@# Stainless Steel Construction#@#
Fabrication from stainless steel provides corrosion resistance in high-humidity wash areas and supports routine chemical cleaning without surface degradation. Operations teams benefit from a long service life and simplified daily cleaning protocols.
#@@# Compact Footprint#@#
With a width and depth of 42 inches and a height of 20.50 inches, the unit fits directly above common commercial dish machines and racks while minimizing intrusion into ceiling space. Designers preserve headroom and maintain clearances required by dishroom workflows.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the Advance Tabco CH-4242 condensate hood weekly for debris and corrosion, focusing on welds and the inside bottom gutter. Flush the 3/8" rear drain with a mild detergent solution and clear scale with a soft brush. Verify the 8 x 10 exhaust conduit opening remains unobstructed; confirm conduit installation by qualified technicians. Tighten mounting at the 2 x 4 notch and confirm level alignment. Record maintenance actions and replace damaged seals immediately.
