A tall rear and right side splash assembly prevents wash water from reaching walls and adjacent surfaces, protecting finishes and adjacent equipment. Facility planners will preserve wall integrity and limit secondary cleaning tasks.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug nearby equipment and clear the area. Remove the fiberglass grating and strain basket. Scrub the 10" deep stainless steel bowl with a mild detergent and a soft brush; rinse with clean water. Sanitize food-contact splash surfaces and floor recess using an EPA-approved sanitizer per label directions. Clean 4" O.D. waste pipe access and remove debris. Dry all surfaces to prevent corrosion. Schedule weekly deep cleaning to reduce bacteria, grease buildup, energy waste, and inspection failures.#@@#Additional Info#@#Advance Tabco's 9-OP-36FM-FGR mop sink measures 35.63" W with a 33-3/8" W x 24" D, 10" deep bowl, and 16-1/2" tall splashes. It features stainless steel, removable fiberglass grating, a strainer basket, and a 4" O.D. waste with a 3" tailpiece.#@@#General Info#@#Description #@#
A tall rear and right side splash assembly prevents wash water from reaching walls and adjacent surfaces, protecting finishes and adjacent equipment. Facility planners will preserve wall integrity and limit secondary cleaning tasks.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the Advance Tabco 9-OP-36FM-FGR mop sink weekly for debris on the removable fiberglass subway grating and clean with a neutral detergent to prevent odor and drainage loss. Flush the 4" O.D. waste pipe and remove the stainless steel strainer basket for sanitization. Verify floor flush alignment and reseal joints if gaps appear. Lubricate mounting hardware and replace damaged splashes or seals to maintain hygienic, code-compliant operation.
