Precision splash protection engineered for busy hand sink stations. This welded side splash installs at a height of 7.75 inches and secures directly to sinks with 14-inch by 10-inch bowls, effectively guarding walls and adjacent surfaces from splatter during peak service. Food service managers benefit from a compact, durable guard that reduces cleaning time and limits moisture damage in tight work areas.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug fixtures before cleaning. Remove debris and wash the welded side splash with a mild detergent and warm water using a non-abrasive cloth. Rinse thoroughly and dry to prevent mineral buildup. For grease, apply a degreaser, agitate lightly, rinse, and dry. Inspect welds and mounting hardware for wear; tighten fasteners as needed. Clean monthly or more often in heavy-use areas to reduce bacteria, lower fire risk, improve efficiency, and help pass CSA inspections.#@@#Additional Info#@#Advance Tabco 7-PS-16 welded side splash installs at 7.75" H to protect surfaces for 14" x 10" hand sinks; one-side orientation, splash-mounted faucets, stainless, weighs 5 pounds, CSA-compatible for commercial kitchens.#@@#General Info#@#Description #@#
Precision splash protection engineered for busy hand sink stations. This welded side splash installs at a height of 7.75 inches and secures directly to sinks with 14-inch by 10-inch bowls, effectively guarding walls and adjacent surfaces from splatter during peak service. Food service managers benefit from a compact, durable guard that reduces cleaning time and limits moisture damage in tight work areas.
#@@# Mounting Compatibility#@#
Designed for hand sinks with 14 inches wide by 10 inches front to back bowls, the unit fits splash-mounted faucets and installs on either the left or right side as specified. Installers receive clear dimensional alignment, which reduces onsite modifications and maintains code-compliant clearances.
#@@# Welded Construction#@#
Fabricators weld the splash seam to create a continuous barrier that resists separation under repeated cleaning cycles. Operators benefit from a rigid assembly that remains square and resists warping in high humidity kitchen environments.
#@@# Installed Height#@#
The 7.75-inch installed height provides effective coverage for typical hand sink use while preserving overhead access for faucets and soap dispensers. Facilities avoid interference with service fixtures while maintaining effective splash containment.
#@@# Material Durability#@#
Manufacturers construct the guard from commercial-grade stainless steel that resists corrosion from detergents and sanitizers used in institutional cleaning protocols. Maintenance crews report fewer surface defects and longer intervals between replacements.
#@@# Space Efficiency#@#
Engineers specify a depth of 15.25 inches to align with standard sink backriser dimensions and countertop overhangs, optimizing clearance in narrow utility rooms. Operators preserve valuable counter real estate while adding protection where space is limited.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the Advance Tabco 7-PS-16 welded side splash weekly for tight welds and secure fasteners. Remove debris and clean with a neutral detergent and warm water; rinse thoroughly and dry to prevent corrosion. Verify gasket condition around the sink and replace if cracked. Adjust mounting hardware to maintain a 7.75" installed height and 15.25" depth alignment. Sanitize with approved agents per CSA guidelines and document maintenance dates.
