The overall footprint measures 27.5 inches front-to-back by 48 inches left-to-right with a height of 39 inches, enabling placement in compact sculleries while preserving ergonomic reach. The absence of drainboards reduces lateral space needs and concentrates washing capacity in a single, dense footprint.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug nearby equipment before cleaning. Remove debris from both 24" x 24" compartments and drain baskets. Apply a mild detergent with a soft cloth and scrub seams and corners. Rinse with warm water and remove standing water with a towel. Clean 6" backsplash and galvanized legs; dry plastic bullet feet. Inspect door seals and fasteners. Schedule coil and vent cleaning to prevent grease buildup, reduce fire risk, and extend equipment life.#@@#Additional Info#@#Advance Tabco's 6-42-48-X scullery sink features two 24" x 24" x 13" compartments, 16 gauge stainless steel, a 6" backsplash, a galvanized leg base, plastic bullet feet, and a 48" width for commercial kitchens.#@@#General Info#@#Description #@#
The overall footprint measures 27.5 inches front-to-back by 48 inches left-to-right with a height of 39 inches, enabling placement in compact sculleries while preserving ergonomic reach. The absence of drainboards reduces lateral space needs and concentrates washing capacity in a single, dense footprint.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the scullery sink daily for debris and remove solids from the 1-1/2 IPS waste drain baskets to prevent clogs. Clean stainless steel surfaces with neutral pH detergent and warm water; rinse and dry with a microfiber cloth to avoid spots. Sanitize compartments after heavy use with an approved food-contact sanitizer, following manufacturer dwell times. Tighten galvanized leg connections monthly and check plastic bullet feet for wear; replace worn feet immediately.