Built for busy kitchens that demand compact utility without compromise, this undermount sink combines corrosion-resistant 304 stainless steel with a compact footprint to optimize prep stations and service lines. Installers will appreciate a trim size that fits tight counters while operators gain a durable wash area that resists denting and staining. Engineers specified 20 gauge construction to balance strength and manageable weight for commercial installations.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug nearby equipment and remove debris from the 1014A-10 sink. Use a mild detergent and warm water with a soft cloth to scrub the 304 stainless steel; avoid abrasive pads. Rinse thoroughly and dry to prevent spotting. Clean the 3-1/2" drain opening and underside trim to remove grease. Inspect seals and the undermount fit; tighten fasteners if needed. Perform coil and vent cleaning on adjacent equipment to reduce fire risk and maintain efficiency.#@@#Additional Info#@#Advance Tabco’s 1014A-10 Smart Series undermount sink measures 10" H x 12.5" W x 16.5" D, features one 10" x 14" compartment, 3-1/2" drain opening and 20 gauge 304 stainless steel construction for corrosion resistance and washdown durability.#@@#General Info#@#Description #@#
Built for busy kitchens that demand compact utility without compromise, this undermount sink combines corrosion-resistant 304 stainless steel with a compact footprint to optimize prep stations and service lines. Installers will appreciate a trim size that fits tight counters while operators gain a durable wash area that resists denting and staining. Engineers specified 20 gauge construction to balance strength and manageable weight for commercial installations.
#@@# Bowl Capacity#@#
This single compartment sink provides a 10-inch wide bowl with a 14-inch front-to-back dimension and 10-inch depth, yielding a usable wash area tailored for smallware, prep tasks, and hand sinks. Designers selected a 3-1/2 inch drain opening to accept standard drain fittings and streamline wastewater flow.
#@@# Undermount Integration#@#
The undermount configuration allows the sink to mount beneath solid surface and non-stainless tops, producing a flush countertop interface that simplifies cleaning and maintains sanitary surfaces. Fabricators can set the 12-1/2 inch by 16-1/2 inch outside trim size to align with cutouts while preserving flange support beneath the countertop.
#@@# Material Performance#@#
Constructed from 304 stainless steel, the unit resists corrosion in high humidity and frequent wash cycles common in food service environments. Maintenance teams will find that the metal surface accepts routine cleaning agents without coating degradation.
#@@# Gauge and Durability#@#
20 gauge stainless steel provides a balance of rigidity and formability for repeated daily use without excessive material thickness that complicates installation. Contractors will note reduced panel flex compared with thinner gauges while still allowing professional seam welding.
#@@# Footprint Efficiency#@#
With overall dimensions of approximately 10 inches high by 12.5 inches wide by 16.5 inches deep, the sink fits compact workstations where space optimization matters.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the Advance Tabco 1014A-10 sink weekly for weld integrity and trim seal continuity to prevent leaks. Clean with a neutral pH stainless steel cleaner and a nonabrasive cloth; rinse and dry to avoid spotting. Remove debris from the 3-1/2" drain opening and confirm drain assembly torque. Verify undermount fasteners and caulk; tighten hardware as needed. Schedule monthly polish to restore 304 stainless finish and deter corrosion.
