Leg-mounted configuration and self-contained insulated construction simplify installation and allow convenient access for maintenance. The compression draw-off valve uses a two-position design to speed product transfer and minimize operator handling.
LongDescription#@#NA#@@#Cleaning Instructions#@#Disconnect power and cool the kettle before cleaning. Drain contents through the compression draw-off valve. Clean the 304 stainless steel liner with mild detergent and a soft cloth; avoid abrasive pads. Rinse thoroughly and dry to prevent corrosion. Wipe the exterior jacket and actuator-assisted cover with non-abrasive cleaner. Inspect seals and valves; replace worn parts. Clean vents and remove grease from surrounding surfaces to reduce fire and inspection risks.#@@#Additional Info#@#AccuTemp’s ALLEC-80-E kettle has an 80-gallon capacity, 2/3 jacket, 304 stainless steel liner, 30 PSI rating, and 30,000 Watts at 208 volts.#@@#General Info#@#Description #@#
Leg-mounted configuration and self-contained insulated construction simplify installation and allow convenient access for maintenance. The compression draw-off valve uses a two-position design to speed product transfer and minimize operator handling.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect seals and actuator hinge monthly to prevent steam leaks and ensure safe operation. Flush the 304 stainless steel liner weekly with warm water and a mild alkaline cleaner; scrub with a nonabrasive pad and rinse thoroughly. Verify heating elements visually and test electrical connections quarterly, tightening terminals and confirming 208v supply stability. Drain and operate the 2-compression draw-off valve monthly to clear sediment and lubricate moving parts per CSA guidelines.