Deliver reliable gas connection performance in demanding commercial kitchens with a rugged connector hose engineered for safety and service continuity. This assembly features a 3/4 inch inner diameter, 60 inches of flexible reach, and stainless steel braid sheathing with an extruded plastic coating to resist abrasion and allow frequent handling. Installers receive two SwiveLink swivels and two 90° elbows to reduce stress at terminations and streamline routing in tight equipment bays.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug gas appliances and shut off the gas supply before cleaning. Disconnect HG-2D-60S and inspect the stainless steel braid and plastic coating for damage. Wipe the exterior with a mild detergent and a soft cloth; avoid abrasive pads. Flush fittings with clean water and dry completely. Check SwiveLink swivels and 90° elbows for debris; remove buildup with a nylon brush. Reattach and test for leaks with a CSA-approved leak detector.#@@#Additional Info#@#T&S Brass HG-2D-60S Safe-T-Link gas connector hose has a 3/4" connection, 60" length, stainless steel braid with plastic coating, two SwiveLink swivels, two 90° elbows, and an integrated restraining device; CSA compliant for commercial use.#@@#General Info#@#Description #@#
Deliver reliable gas connection performance in demanding commercial kitchens with a rugged connector hose engineered for safety and service continuity. This assembly features a 3/4 inch inner diameter, 60 inches of flexible reach, and stainless steel braid sheathing with an extruded plastic coating to resist abrasion and allow frequent handling. Installers receive two SwiveLink swivels and two 90° elbows to reduce stress at terminations and streamline routing in tight equipment bays.
#@@# Durable Stainless Construction#@#
The stainless steel braid provides mechanical strength and resists kinking under normal routing conditions, extending service life in active kitchens. A plastic coating adds a moisture barrier and smooth exterior that simplifies cleaning while preventing metal-to-metal wear.
#@@# Full-Length Flexibility#@#
Sixty inches of hose length allows installers to position ranges, fryers, and other gas appliances with operational clearance while maintaining safe connection geometry. The 3/4 inch inner diameter supports standard commercial gas flow requirements without excessive pressure drop.
#@@# Swivel End Connections#@#
Two SwiveLink swivels reduce torsion transfer to fittings during equipment movement and simplify alignment during installation. Technicians achieve faster connections and reduced fatigue when they rotate fittings instead of twisting the entire hose.
#@@# Right-Angle Elbows#@#
The included 90° elbows minimize sharp bends at the appliance and supply side, preserving internal flow area and lowering strain on seals. Engineers maintain consistent flow characteristics and reduce stress that causes premature leak points.
#@@# Integrated Restraining Device#@#
A built-in restraining device secures the assembly to fixed structures, limiting movement and preventing accidental disconnection under load. Maintenance teams gain an added layer of operational safety and easier compliance with inspection protocols.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the T&S Brass HG-2D-60S Safe-T-Link gas connector routinely for abrasion, kinks, or coating breaches; replace immediately upon damage. Clean external braid with a soft brush and mild detergent; rinse and dry before reuse. Verify all fittings and the two SwiveLink swivels for tightness and torque to manufacturer specs. Test for leaks using approved soap solution and gas detector. Store coiled without sharp bends to prevent stress.