High-output gas connection that combines reliability and safety for busy kitchen installations. This stainless steel braided hose with an extruded coating is designed for continuous use, resisting abrasion while ensuring secure gas transfer. Installers will appreciate the compact 36-inch length and standardized 1/2-inch couplings for predictable fitment in commercial cooking systems.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug appliances and shut gas valves before you work. Disconnect the T&S Brass HG-2C-36S Safe-T-Link gas hose and inspect the plastic coated stainless steel braid for cracks, kinks, or corrosion. Wipe the exterior with a mild detergent and a soft cloth; rinse and dry thoroughly. Clean swivel joints and 90° elbows with a brush to remove grease. Reinspect seals and replace damaged parts. Reconnect and test for leaks using a soap solution; never use open flame.#@@#Additional Info#@#T&S Brass designed the HG-2C-36S Safe-T-Link gas connector hose with a 1/2" connection and 36" length. The stainless steel braid with plastic coating resists abrasion.#@@#General Info#@#Description #@#
High-output gas connection that combines reliability and safety for busy kitchen installations. This stainless steel braided hose with an extruded coating is designed for continuous use, resisting abrasion while ensuring secure gas transfer. Installers will appreciate the compact 36-inch length and standardized 1/2-inch couplings for predictable fitment in commercial cooking systems.
#@@# SwiveLink Couplings#@#
Two swivel fittings minimize torque during installation and service, preventing stress on manifolds and threaded joints. Technicians report faster alignments and fewer rework cycles when hoses rotate freely at connection points.
#@@# 90 Degree Elbows#@#
Dual 90-degree elbows facilitate tight routing near walls and control panels, minimizing required clearance and reducing strain on adjacent piping. Plumbers achieve neater runs and maintain proper bend radii without needing additional fittings.
#@@# Stainless Braid Coating#@#
The stainless steel braid, covered by an extruded plastic layer, protects against mechanical wear and simplifies cleaning in high-traffic areas. Maintenance teams benefit from a durable surface that resists cuts and grime while adhering to typical kitchen sanitation practices.
#@@# Standard 1/2 Inch Diameter#@#
A 1/2-inch internal diameter matches common commercial appliance inlets, enabling direct replacement without the need for adapters. Procurement staff can avoid compatibility issues and reduce inventory complexity by standardizing on this connector size.
#@@# 36 Inch Length#@#
The 36-inch overall length provides reach for freestanding ranges, fryers, and modular cooklines while preserving flexibility for repositioning equipment. Operators can relocate appliances during kitchen reconfigurations without needing to replace the hose.
#@@# Material Combination#@#
Plastic-coated stainless steel combines corrosion resistance with a pliable exterior that resists kinking under torque.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the T&S Brass HG-2C-36S Safe-T-Link gas connector hose monthly for kinks, abrasion, or coating breaches and replace immediately if any damage appears. Clean the plastic coated stainless steel braid with a soft cloth and mild detergent; avoid solvents that degrade coatings. Tighten 1/2" connections and verify (2) SwiveLink swivels and (2) 90° elbows rotate freely. Test for leaks using a soap solution; never use open flame. Store coiled without sharp bends to preserve integrity.