Stop trading control for convenience. This wall-mounted pedal valve offers hands-free operation with a single pedal that withstands frequent use in busy kitchens and clinical settings, reducing cross-contamination and enhancing workflow efficiency. Designed for both hot and cold water service, this unit positions the inlet one inch from the wall and locates the pedal tip approximately 13-3/4 inches from the wall for predictable installation and ergonomic use.
LongDescription#@#NA#@@#Cleaning Instructions#@#Install the T&S Brass B-0508-LKS pedal valve per manufacturer specs. Shut water supply, drain lines, and mount the double wall unit so inlet center sits 1" from wall and pedal tip extends about 13-3/4". Connect straight loose key stop on inlet and torque fittings to spec. Flush lines, check for leaks, and verify pedal operation for hot and cold water. Clean exterior with non-abrasive cleaner. Perform routine inspections to prevent contamination, fires, inefficiency, and equipment failure.#@@#Additional Info#@#T&S Brass B-0508-LKS pedal valve mounts double-wall with a single pedal for hot or cold water, 1" inlet center; wall-to-pedal tip is 13-3/4", straight loose key stop, 6.82 pounds, CSA-compliant for high-use foodservice.#@@#General Info#@#Description #@#
Stop trading control for convenience. This wall-mounted pedal valve offers hands-free operation with a single pedal that withstands frequent use in busy kitchens and clinical settings, reducing cross-contamination and enhancing workflow efficiency. Designed for both hot and cold water service, this unit positions the inlet one inch from the wall and locates the pedal tip approximately 13-3/4 inches from the wall for predictable installation and ergonomic use.
#@@# Double Wall#@#
This double wall construction isolates service connections from the pedal mechanism, increasing durability and simplifying maintenance. Installers will appreciate the straightforward access to the straight loose key stop on the inlet for rapid shutoff during servicing.
#@@# Single Pedal#@#
The single pedal design provides intuitive foot operation that minimizes hand contact with controls and accelerates turnover at sinks. Staff adapt quickly to the pedal geometry, improving throughput while maintaining precise flow control for handwashing or rinsing tasks.
#@@# Compact Reach#@#
The unit positions the inlet one inch from the wall and places the pedal tip about 13-3/4 inches from the wall, offering a compact footprint that fits tight alcoves. Planners can install this valve where clearance is limited without sacrificing operator comfort or performance.
#@@# Service Stop#@#
The straight loose key stop on the inlet allows technicians to isolate the valve without disrupting adjacent fixtures. Maintenance teams can reduce downtime by closing the stop at the inlet during repairs or part replacement, preserving adjacent operations.
#@@# Robust Materials#@#
T&S Brass engineering yields corrosion-resistant components that endure daily cleaning and chemical exposure common in food service and medical environments. Facility managers benefit from reduced part replacement and consistent performance under heavy use.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect pedal valve linkage weekly and operate the pedal fully to ensure free movement and prompt shutoff. Lubricate pivot points with food-grade lubricant every three months to minimize wear. Tighten wall mounting fasteners to 25–30 in·lb torque if vibration loosens connections. Flush supply lines monthly to remove sediment; open valve fully for 30 seconds. Replace worn key stops and seals immediately to prevent leaks.