The 1.5 inch height keeps stored items accessible while preserving legroom and ergonomic clearance for staff working at the table. Operators can store trays, pans, and small equipment without compromising workstation comfort.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment and clear the area. Remove loose debris and scrape grease with a plastic scraper. Mix a mild detergent with warm water (use gallons or liters as needed) and scrub surfaces with a non-abrasive brush. Rinse with clean water and dry thoroughly to prevent corrosion. Clean vents and condensers to improve efficiency and reduce fire risk. Inspect seals and hardware; tighten or replace worn parts. Log each cleaning to support CSA compliance and pass inspections.#@@#Additional Info#@#Sapphire Manufacturing UDS-30120G undershelf measures 115" W x 25" D x 1.5" H, made of 18 gauge galvanized steel with NSF certification, six 1-5/8" leg holes, and welded construction for heavy loads in kitchens, schools, hospitals, and bars.#@@#General Info#@#Description #@#
The 1.5 inch height keeps stored items accessible while preserving legroom and ergonomic clearance for staff working at the table. Operators can store trays, pans, and small equipment without compromising workstation comfort.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Install the Sapphire Manufacturing UDS-30120G undershelf securely beneath the work table frame to distribute stored items evenly and prevent sag. Clean galvanized steel with a neutral detergent, rinse thoroughly, and dry to inhibit corrosion. Inspect welds and leg holes regularly for deformation; tighten fasteners and replace damaged hardware immediately. Apply a light coat of food-safe oil to cut edges after cleaning. Schedule biannual load tests and document results for CSA compliance.
