With the Randell 8395W-290 Prep Table, you can enjoy preparing and serving luscious meals to your guests hassle-free!
The Randell 8395W-290 Prep Table’s refrigeration system utilizes a state-of-the-art, environmentally friendly R290 Natural Propane refrigerant with zero ozone depletion and three (3) global warming potential. This model has two (2) 1/4 horsepower motors, each maximizing performance and efficiency. The fridge features an independent base control with adaptive defrost allowing precise control of the base cabinet. In addition, the refrigerator has a hinged compressor compartment panel for access to the clean-out port and condenser coil.
The tabletop of the Randell 8395W-290 Prep Table can accommodate 42 1/6 size pans protected by insulated pan rail cover and recessed pan-ledge ensuring cold above the pans and the food items inside. The pan rail is conductively cooled by a cold-wall wrapped tank using Randell’s exclusive aluminum cold transfer plates. The cooling system has an independently controlled rail and base temperature managed by externally mounted electronic controllers. The independent rail control allows the users precise control of the temperature and the ability to shut the rail off at night for energy saving. Moreover, the workstation has a 10-inch polyethylene cutting board for an efficient food prep worktop.
Boasting a spacious design, the Randell 8395W-290 Prep Table has a total capacity of 28.18 cubic feet giving ample space for food products to be stored inside. This equipment offers three (3) 27-inch doors with flush-mounted door pulls. The doors are thermoformed high-impact ABS providing extra depth and insulation value while providing gasket protection plus the door gaskets are press-fit magnetic type ensuring a positive seal. The interior sidewalls are also thermoformed with high-impact ABS to create cleanable corners and surfaces. Behind each door is supplied with one (1) epoxy-coated heavy-duty shelf provided as standard and is supported by heavy-duty metal supports.
Built as heavy-duty and long-lasting equipment, Randell 8395W-290 Prep Table’s exterior is constructed with stainless steel while the interior is made with anodized aluminum. Weighing 785 pounds, this kitchen unit has a dimension of 46.5 inches in height, 95 inches in length, 33 inches in width, and is supported by six (6) 4-inch casters. For proper electrical connection, it must be plugged in 115 Volts, 60 Hertz, Single Phase, 5.8 amperes of power, and uses a NEMA 5-15P plug.
LongDescription#@#NA#@@#Cleaning Instructions#@#Remove all the food items and defrost the Randell 8395W-290 Prep Table before cleaning. The exterior of the cabinet should also be cleaned regularly with a stainless steel cleaner or a mild liquid detergent applied on a non-abrasive pad. As much as possible, use soft water for rinsing to prevent mineral deposit buildup. Kindly refer to the Cleaning and Maintenance section of the manual for the complete and detailed cleaning instructions.#@@#Additional Info#@#The Randell 8395W-290 Prep Table is made in the USA and is NSF, cUL, UL certified.#@@#General Info#@#With the Randell 8395W-290 Prep Table, you can enjoy preparing and serving luscious meals to your guests hassle-free!
The Randell 8395W-290 Prep Table’s refrigeration system utilizes a state-of-the-art, environmentally friendly R290 Natural Propane refrigerant with zero ozone depletion and three (3) global warming potential. This model has two (2) 1/4 horsepower motors, each maximizing performance and efficiency. The fridge features an independent base control with adaptive defrost allowing precise control of the base cabinet. In addition, the refrigerator has a hinged compressor compartment panel for access to the clean-out port and condenser coil.
The tabletop of the Randell 8395W-290 Prep Table can accommodate 42 1/6 size pans protected by insulated pan rail cover and recessed pan-ledge ensuring cold above the pans and the food items inside. The pan rail is conductively cooled by a cold-wall wrapped tank using Randell’s exclusive aluminum cold transfer plates. The cooling system has an independently controlled rail and base temperature managed by externally mounted electronic controllers. The independent rail control allows the users precise control of the temperature and the ability to shut the rail off at night for energy saving. Moreover, the workstation has a 10-inch polyethylene cutting board for an efficient food prep worktop.
Boasting a spacious design, the Randell 8395W-290 Prep Table has a total capacity of 28.18 cubic feet giving ample space for food products to be stored inside. This equipment offers three (3) 27-inch doors with flush-mounted door pulls. The doors are thermoformed high-impact ABS providing extra depth and insulation value while providing gasket protection plus the door gaskets are press-fit magnetic type ensuring a positive seal. The interior sidewalls are also thermoformed with high-impact ABS to create cleanable corners and surfaces. Behind each door is supplied with one (1) epoxy-coated heavy-duty shelf provided as standard and is supported by heavy-duty metal supports.
Built as heavy-duty and long-lasting equipment, Randell 8395W-290 Prep Table’s exterior is constructed with stainless steel while the interior is made with anodized aluminum. Weighing 785 pounds, this kitchen unit has a dimension of 46.5 inches in height, 95 inches in length, 33 inches in width, and is supported by six (6) 4-inch casters. For proper electrical connection, it must be plugged in 115 Volts, 60 Hertz, Single Phase, 5.8 amperes of power, and uses a NEMA 5-15P plug.#@@#Delivery Details#@#● Inspect the Randell 8395W-290 Prep Table’s completeness and condition upon receiving it.
● This unit is specifically designed for commercial use.
● List down any damage observed on the carrier’s freight bill before signing the delivery receipt.
● Because of its massive frame, more than two people are required to lift this equipment.
● In case a loading dock is not available in your receiving area, kindly use a lift gate instead.
● Installation must be performed by Randell service partners to ensure that the unit complies with all the applicable local and national codes.
● Do not connect this unit to a power source with unknown electrical specifications.
● Please check the dimension of the access path to the final location (doors width and height). This is to ensure that the unit will fit.#@@#deliverynotes#@#Culinary Depot ships the Randell 8395W-290 Prep Table within # business days after receiving cleared payment.#@@#Maintenance Guide#@#The Randell 8395W-290 Prep Table contains R290 flammable refrigerant so observe caution when handling or moving the unit. The equipment must be properly leveled; Check all legs or casters ensure they all are in contact with the floor while maintaining a level work surface. Always check for any damages before using, and conduct repairs or replacements if needed. For complicated issues, check the Owner’s Manual for more detailed maintenance guidelines. For inspections, schedule an appointment with an authorized service agent.