The Randell 8272D-290 Preparation Table is specially designed to address all your prep needs in one awesome piece of equipment!
Configured for use with 115 Volts, 60 Hertz, Single-Phase, and 5.8 Amps via a NEMA 5-15 plug, the Randell 8272D-290 Preparation Table uses an R290 refrigerant. SNAP (CA) compliant, this type of refrigerant has zero (0) ozone depletion (ODP) and three (3) global warming potential - making it extra safe for the environment. Apart from having a dual compressor system for optimal performance and efficiency, its pan rails are conductively cooled by a cold-wall wrapped tank for maximum heat removal capacity. Further, the independently controlled rails and base temperatures through externally mounted controllers allow precise settings and the ability to shut the rails off at night to save energy.
Weighing 808 pounds with a 14.4 cubic feet capacity, the Randell 8272D-290 Preparation Table is built with a robust, one-piece, stainless steel top. This creates a 15-inch-wide working surface and raised pan rails that separate the fresh food from the prep area. The completely sealed watertight pan rail liner with a smooth finish stainless steel, on the other hand, includes a standard, oversized clean-out port with a valve for easy clean-up. While the exterior stainless steel fronts and ends add strength, the interior side walls and door openings that are made of thermoformed high-impact ABS create cleanable corners and surfaces.
As extra features, the Randell 8272D-290 Preparation Table also has an independent base control with an automatic adaptive defrost. Aside from having an epoxy-coated, heavy-duty shelf, its doors with stainless steel exterior come with easy-to-grasp door pulls for extra convenience. The door gaskets, on the other hand, are a press-fit magnetic type that ensures positive and efficient seals while promoting easy cleaning and replacement. This appliance is also designed with 6-inch casters that promote trouble-free mobility and provide better floor protection.
LongDescription#@#NA#@@#Cleaning Instructions#@#Before you start with cleaning, make sure that you have disconnected your Randell 8272D-290 Preparation Table from the power source to avoid physical injuries. Using non-abrasive tools with cleaners that are free of chlorides and phosphates is strongly recommended. It is also advised that you scrub the surface parallel to visible lines using a plastic scouring pad or a soft cloth to avoid damaging the stainless steel’s passive layer. Ensure that you also rinse, and wipe dry every section immediately, and check the unit after cleaning if it is operating properly.#@@#Additional Info#@#The Randell 8272D-290 Preparation Table is proudly designed, tested, and manufactured in the USA. It is also NSF, C-UL, and UL certified.#@@#General Info#@#The Randell 8272D-290 Preparation Table is specially designed to address all your prep needs in one awesome piece of equipment!
Configured for use with 115 Volts, 60 Hertz, Single-Phase, and 5.8 Amps via a NEMA 5-15 plug, the Randell 8272D-290 Preparation Table uses an R290 refrigerant. SNAP (CA) compliant, this type of refrigerant has zero (0) ozone depletion (ODP) and three (3) global warming potential - making it extra safe for the environment. Apart from having a dual compressor system for optimal performance and efficiency, its pan rails are conductively cooled by a cold-wall wrapped tank for maximum heat removal capacity. Further, the independently controlled rails and base temperatures through externally mounted controllers allow precise settings and the ability to shut the rails off at night to save energy.
Weighing 808 pounds with a 14.4 cubic feet capacity, the Randell 8272D-290 Preparation Table is built with a robust, one-piece, stainless steel top. This creates a 15-inch-wide working surface and raised pan rails that separate the fresh food from the prep area. The completely sealed watertight pan rail liner with a smooth finish stainless steel, on the other hand, includes a standard, oversized clean-out port with a valve for easy clean-up. While the exterior stainless steel fronts and ends add strength, the interior side walls and door openings that are made of thermoformed high-impact ABS create cleanable corners and surfaces.
As extra features, the Randell 8272D-290 Preparation Table also has an independent base control with an automatic adaptive defrost. Aside from having an epoxy-coated, heavy-duty shelf, its doors with stainless steel exterior come with easy-to-grasp door pulls for extra convenience. The door gaskets, on the other hand, are a press-fit magnetic type that ensures positive and efficient seals while promoting easy cleaning and replacement. This appliance is also designed with 6-inch casters that promote trouble-free mobility and provide better floor protection.#@@#Delivery Details#@#● Considering its size and weight, the Randell 8272D-290 Preparation Table may require two or more people to lift it.
● A liftgate may be needed if there are no loading docks available.
● Thoroughly assess the appliance for any damage or missing component before signing the delivery receipt.
● You may choose to submit a damage claim to the freight carrier should there be apparent damages.
● It is strongly suggested to install the equipment in a space with adequate clearances to prevent issues with regular cleaning, maintenance, and repair.
● It is imperative that you first check the voltage characteristics of the equipment before connecting it to a power source. Failure to do so can lead to irreparable unit damage and serious, even fatal, physical injuries.#@@#deliverynotes#@#Culinary Depot normally ships the Randell 8272D-290 Preparation Table in # business days of your payment being received and cleared.#@@#Maintenance Guide#@#For longer product life, you must keep your Randell 8272D-290 Preparation Table clean as this does not only preserve its mint condition but also avoids affecting the food quality, too. Conducting regular checks on the gaskets for possible leaks helps ensure that you do not waste energy and overwork your unit. Checking the condenser regularly for accumulated dirt or dust will also help maintain its efficiency. If signs of wear and tear or temperature abnormalities start to become apparent, call a service agent immediately for a prompt assessment.