Randell 8148N-290-PCB Refrigerated Prep Table
Make delicious meals in a snap using the Randell 8148N-290-PCB Refrigerated Prep Table!
The Randell 8148N-290-PCB Refrigerated Prep Table features interior side walls and door openings that are made from high-impact ABS. it has epoxy coated, heavy-duty shelf, mounted on heavy-duty metal supports, to provide ample storage space. Inside it is a cold wall which assists in conductive cooling. This allows for efficient distribution of cold air.
Storage is convenient with the Randell 8148N-290-PCB Refrigerated Prep Table. Its 9 cubic feet of storage is made accessible through a 27-inch door. This door is crafted with a stainless steel exterior and has flush-mounted door pulls. The interior is lined with high-impact ABS. this makes cleaning the interior corners and surfaces easy. Not only that, it adds insulation and depth to extend the longevity of the gasket. As for the gaskets themselves, the door gasket is press-fitted magnetic type assuring positive and efficient seals. A stainless steel, light weight cover conceals the pan rail. This prep table can fit six pans that are 1/3 sized.
The Randell 8148N-290-PCB Refrigerated Prep Table has an external mounted electronic controller set that allows users to monitor and change the base settings. It can be set to adaptive defrost and has a rall on/off feature that lets you save 60% of energy when not in active use. It has a hinged compressor compartment that allows for convenient cleaning access. Moreover, the refrigeration system is a self-contained, single compressor system.
With an interior cabinet made from non-magnetic stainless steel, the Randell 8148N-290-PCB Refrigerated Prep Table has a one-piece construction. This creates an exterior 15-inch wide work surface complete with a 4-inch tall front raised pan rail that keep a division between fresh food and prep area. It has a water-tight sealed pan rail that is made from the same material as the rest of the interior. It features integral recessed pan ledge as well as standard over-sized clean out port. This makes clean-up easy for users. Anodized aluminum makes up the rear wall and interior floor.
The Randell 8148N-290-PCB Refrigerated Prep Table weighs 405 pounds and has overall dimensions of 48 inches long, 33 inches deep, and a height of 52.5 inches. It provides users with a poly cutting board to better accommodate needs. This refrigerated prep table uses 115 volts, 1 phase, 60 hertz, and 6 amps. It is supplied with a NEMA 5-15P plug and boasts a powerful 1/3 horsepower motor for its self-contained refrigeration system. 6 inch casters are included to help users move their prep table from place to place
LongDescription#@#NA#@@#Cleaning Instructions#@#Depending on the rate at which dirt forms, clean the Randell 8148N-290-PCB Refrigerated Prep Table on a daily or weekly basis. Make sure to clean the gaskets and drain rails with a solution of warm water and mild liquid dish detergent. The condenser coils should be brushed or vacuumed once a month.#@@#Additional Info#@#The Randell 8148N-290-PCB Refrigerated Prep Table is c-UL, UL, and NSF listed. This refrigerated prep table is also made in the United States of America.#@@#General Info#@#Randell 8148N-290-PCB Refrigerated Prep Table
Make delicious meals in a snap using the Randell 8148N-290-PCB Refrigerated Prep Table!
The Randell 8148N-290-PCB Refrigerated Prep Table features interior side walls and door openings that are made from high-impact ABS. it has epoxy coated, heavy-duty shelf, mounted on heavy-duty metal supports, to provide ample storage space. Inside it is a cold wall which assists in conductive cooling. This allows for efficient distribution of cold air.
Storage is convenient with the Randell 8148N-290-PCB Refrigerated Prep Table. Its 9 cubic feet of storage is made accessible through a 27-inch door. This door is crafted with a stainless steel exterior and has flush-mounted door pulls. The interior is lined with high-impact ABS. this makes cleaning the interior corners and surfaces easy. Not only that, it adds insulation and depth to extend the longevity of the gasket. As for the gaskets themselves, the door gasket is press-fitted magnetic type assuring positive and efficient seals. A stainless steel, light weight cover conceals the pan rail. This prep table can fit six pans that are 1/3 sized.
The Randell 8148N-290-PCB Refrigerated Prep Table has an external mounted electronic controller set that allows users to monitor and change the base settings. It can be set to adaptive defrost and has a rall on/off feature that lets you save 60% of energy when not in active use. It has a hinged compressor compartment that allows for convenient cleaning access. Moreover, the refrigeration system is a self-contained, single compressor system.
With an interior cabinet made from non-magnetic stainless steel, the Randell 8148N-290-PCB Refrigerated Prep Table has a one-piece construction. This creates an exterior 15-inch wide work surface complete with a 4-inch tall front raised pan rail that keep a division between fresh food and prep area. It has a water-tight sealed pan rail that is made from the same material as the rest of the interior. It features integral recessed pan ledge as well as standard over-sized clean out port. This makes clean-up easy for users. Anodized aluminum makes up the rear wall and interior floor.
The Randell 8148N-290-PCB Refrigerated Prep Table weighs 405 pounds and has overall dimensions of 48 inches long, 33 inches deep, and a height of 52.5 inches. It provides users with a poly cutting board to better accommodate needs. This refrigerated prep table uses 115 volts, 1 phase, 60 hertz, and 6 amps. It is supplied with a NEMA 5-15P plug and boasts a powerful 1/3 horsepower motor for its self-contained refrigeration system. 6 inch casters are included to help users move their prep table from place to place#@@#Delivery Details#@#• Two or more people are needed to handle the Randell 8148N-290-PCB Refrigerated Prep Table.
• Do not sign the delivery receipt without inspecting the prep table for damages.
• In the absence of a loading dock, you may use a lift gate for this prep table.
• Cautiously handle the prep table’s refrigerant tubing, condenser, and evaporator coils as it can be prone to damage.
• Check whether the prep table can fit through the access path before trying to move it to the final location.
• Ensure that the Randell 8148N-290 Refrigerated Prep Table’s electrical specifications match your power source before connecting the two.
• The evaporator fan of this prep table works continuously as long as the prep table itself is turned on.#@@#deliverynotes#@#Culinary Depot normally ships the Randell 8148N-290-PCB Refrigerated Prep Table within # business days after receipt of cleared and confirmed payment.#@@#Maintenance Guide#@#Clean the Randell 8148N-290-PCB Refrigerated Prep Table regularly to ensure that it remains in good condition. Do not use sharp utensils and objects when cleaning as that can strip the stainless steel. For similar reasons, do not use caustic cleaning agents like muriatic acid. Do not pressure wash the prep table as to not damage its electric components.