Stop compromising capacity for durability. This outdoor two-compartment walk-in box delivers a robust storage area and consistent thermal performance for high-volume foodservice operations, supporting split-use layouts across one 12-foot by 10-foot compartment and a 12-foot by 8-foot compartment. Operators will maintain organized cold chain staging while reducing footprint complexity and installation time.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug power and empty both compartments. Remove debris from floor and sweep vents. Mix mild detergent with warm water (use gallons or liters as needed), apply with a soft cloth, and scrub welded seams and door gaskets. Rinse with clean water and dry surfaces completely. Degrease condenser coils and check drain lines weekly to prevent blockages. Inspect door seals and locking deadbolt handle; replace worn parts immediately to maintain CSA compliance and operational efficiency.#@@#Additional Info#@#Norlake's Fast-Trak outdoor two-compartment walk-in, model 12X18X7-7ODCOMBO, measures 12' x 18' x 7'-7". It has 12' x 10' and 12' x 8' compartments, 26 gauge coated steel, aluminum floor, membrane roof, self-closing doors, and weighs 3272 pounds.#@@#General Info#@#Description #@#
Stop compromising capacity for durability. This outdoor two-compartment walk-in box delivers a robust storage area and consistent thermal performance for high-volume foodservice operations, supporting split-use layouts across one 12-foot by 10-foot compartment and a 12-foot by 8-foot compartment. Operators will maintain organized cold chain staging while reducing footprint complexity and installation time.
#@@# Embossed Coated Steel#@#
Engineered with 26-gauge embossed coated steel on both interior and exterior surfaces, this enclosure resists corrosion and simplifies cleaning cycles. Facilities staff will inspect and maintain smooth finishes that withstand frequent traffic and cleaning chemicals.
#@@# Two Compartment Layout#@#
Designed as a combination cooler and freezer box, the two-compartment arrangement creates separate controlled zones for different product classes. Managers can assign inventory by temperature requirement without constructing separate buildings, optimizing workflow and reducing the risk of cross-contamination.
#@@# Integrated Floor System#@#
Delivered with a smooth aluminum interior floor, the unit provides a sanitary, low-friction surface that simplifies pallet movement and floor cleaning. Maintenance teams will experience fewer obstructions during daily sanitation and faster turnover between loads.
#@@# Membrane Roof Assembly#@#
Equipped with a membrane roof, the structure sheds water and provides a reliable weather barrier for outdoor installation. Site planners can rely on consistent roof performance to protect interior temperatures and minimize moisture ingress.
#@@# Self-Closing Doors#@#
Fitted with self-closing doors and locking deadbolt handle hardware, the walk-in secures inventory and enforces door closure to limit temperature loss. Security officers and staff will appreciate controlled access and reduced refrigeration load from minimized open-door time.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect condenser coils monthly and remove debris to maintain heat transfer efficiency. Replace worn door gaskets when visual gaps exceed 1/8 inch and verify self-closing doors latch securely. Clean embossed coated steel surfaces with pH-neutral cleaner; rinse and dry to prevent corrosion. Level the unit and confirm membrane roof drains remain clear. Lubricate hinges and test locking deadbolt handles for smooth operation to reduce downtime.
