The New Age 1331Z Pan Rack is a maintenance-free, all welded unit that will accept as many as 20 pan racks. Ergonomically crafted for maximum convenience, it comes fully assembled and ready to use out of the box. It boasts cross braces with gussets that are securely welded into place to prevent “racking”. Thanks to this feature, it supports trays by the bottom (not just the lip), guaranteeing equal load distribution for effortless, worry-free handling. It has convenient, space-saving dimensions of 20⅜” (width) x 69¾” (height) x 26” (depth) and weighs a mere 68 pounds.
Comprised of high-tensile, primary extruded aluminum (type 6463-T5 alloy) tube and angle sides, the New Age 1331Z Pan Rack offers maximum durability and damage resistance. Its framework boasts an all-welded heli-arc with all welded seams, fully sealed, and without rivets. Each side has two vertical posts of 1” x 1” x .070” wall tube. Welded to each side are aluminum angle runners size 1¼” x 1⅝” x .100” spaced on 3” centers. Having been burnished to perfection, it promises a lifetime’s worth of resilience against rust, corrosion, and other material defects.
For its horizontal supports, the New Age 1331Z Pan Rack features three (3) 1” x 2” tubes welded into a “Z” shape. The corners gussets are of 1½” x1½” x ⅝” thick angles welded to the inside angles at the bottom side. This is to ensure that the horizontal cross bracing meets the vertical upright at the strongest junction. Each gusset is provided a 4-½” weld for total tensile strength and impact resistance. The base also features a Z support frame with pre-tapped plates welded to each corner.
To promote maneuverability and ease of transportation, the New Age 1331Z Pan Rack is furnished with platform type, 5” diameter wheel, full swivel casters with sealed ball bearing axles. The wheels are made of non-marking polyurethane, eliminating track marks on floors and unpleasant screeching noises when the rack is being moved around. In the interest of satisfying the most stringent sanitation regulations, the rack has zero cracks or crevices that could potentially trap dirt.
LongDescription#@#NA#@@#Cleaning Instructions#@#Prepare a basin of warm water infused with mild soap, a non-abrasive sponge or brush, and some hand gloves. After dipping the sponge or brush in the cleaning solution, vigorously scrub every accessible surface of the New Age 1331Z Pan Rack. Rinse the cleaning substance off after a few minutes using a wet cloth or a low-pressure water hose, then dry completely with a microfiber towel. Get rid of any hair or sediment that may be stuck on the casters using a stiff brush, then apply some lubricant on the wheels to keep them mobile. To know the best cleaning practices for this unit, please refer to the cleaning instructions written in the manual.#@@#Additional Info#@#The New Age 1331Z Pan Rack is NSF certified.#@@#General Info#@#The New Age 1331Z Pan Rack is a maintenance-free, all welded unit that will accept as many as 20 pan racks. Ergonomically crafted for maximum convenience, it comes fully assembled and ready to use out of the box. It boasts cross braces with gussets that are securely welded into place to prevent “racking”. Thanks to this feature, it supports trays by the bottom (not just the lip), guaranteeing equal load distribution for effortless, worry-free handling. It has convenient, space-saving dimensions of 20⅜” (width) x 69¾” (height) x 26” (depth) and weighs a mere 68 pounds.
Comprised of high-tensile, primary extruded aluminum (type 6463-T5 alloy) tube and angle sides, the New Age 1331Z Pan Rack offers maximum durability and damage resistance. Its framework boasts an all-welded heli-arc with all welded seams, fully sealed, and without rivets. Each side has two vertical posts of 1” x 1” x .070” wall tube. Welded to each side are aluminum angle runners size 1¼” x 1⅝” x .100” spaced on 3” centers. Having been burnished to perfection, it promises a lifetime’s worth of resilience against rust, corrosion, and other material defects.
For its horizontal supports, the New Age 1331Z Pan Rack features three (3) 1” x 2” tubes welded into a “Z” shape. The corners gussets are of 1½” x1½” x ⅝” thick angles welded to the inside angles at the bottom side. This is to ensure that the horizontal cross bracing meets the vertical upright at the strongest junction. Each gusset is provided a 4-½” weld for total tensile strength and impact resistance. The base also features a Z support frame with pre-tapped plates welded to each corner.
To promote maneuverability and ease of transportation, the New Age 1331Z Pan Rack is furnished with platform type, 5” diameter wheel, full swivel casters with sealed ball bearing axles. The wheels are made of non-marking polyurethane, eliminating track marks on floors and unpleasant screeching noises when the rack is being moved around. In the interest of satisfying the most stringent sanitation regulations, the rack has zero cracks or crevices that could potentially trap dirt.#@@#Delivery Details#@#• At least two people may be required to lift the New Age 1331Z Pan Rack.
• Check the unit for possible damages or missing accessories (if any) prior to signing the delivery form.
• A damage claim document signed by you and the delivery agent is necessary in case damages or missing components are evident.
• Install the pan rack away from culinary equipment that produce fire, smoke, steam, grease, and other possibly detrimental elements.
• For any adjustment or modification on the New Age 1331Z Pan Rack, follow the Installation Guide/Specification Sheet provided by the manufacturer.#@@#deliverynotes#@#Culinary Depot usually ships the New Age 1331Z Pan Rack within # business days of receiving cleared payment.#@@#Maintenance Guide#@#Be sure to comply with the maximum loading capacity stated in the New Age 1331Z Pan Rack’s Owner’s Manual/Specification Sheet. Overloading the slides could affect the unit’s overall framework and compromise its content. In case it comes in contact with a potential corrosive, rinse the affected area right away with clean tap water. To prevent product contamination, do not allow liquids or moisture to stick to it for extended periods of time. At least a couple times a week, thoroughly check every inch and corner for bends, dents, scratches, stains, or anything that might result to greater damage.