Micro Matic delivers this part to integrate with commercial dispensing and refrigeration systems used in restaurants, bars, hospitals, and campus facilities. Facility managers lower downtime risk through standardized, serviceable fittings that fit existing tubing systems.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug and remove tubing. Dismantle the PM0308S elbow from fittings with wrenches. Flush lines with potable water, then circulate a mild detergent solution. Rinse with clean water until residue is gone. Inspect seals and replace damaged O-rings. Sanitize with a food-safe sanitizer per CSA or local guidelines. Dry components fully before reassembly. Clean weekly or per usage to reduce contamination, fire risk, energy waste, and equipment failure.#@@#Additional Info#@#Micro Matic PM0308S 0.31" John Guest elbow connector suits 5/16" OD beverage tubing, allowing 90° rerouting without flow restriction; it ensures secure push-fit sealing, CSA-compliant materials, and quick installation for service environments.#@@#General Info#@#Description #@#
Micro Matic delivers this part to integrate with commercial dispensing and refrigeration systems used in restaurants, bars, hospitals, and campus facilities. Facility managers lower downtime risk through standardized, serviceable fittings that fit existing tubing systems.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the Micro Matic PM0308S elbow connector by inspecting tubing connections weekly for leaks and fit. Flush lines with food-safe cleaner after heavy use and purge with potable water until clear. Disassemble the John Guest equal elbow quarterly to inspect O-rings; replace worn seals to prevent pressure loss. Lubricate O-rings with silicone grease before reassembly. Calibrate flow and pressure settings after maintenance.
