Designed for high-throughput draft systems, this coil fitting provides robust connections and consistent flow control for commercial pouring lines. Engineers specified the metal ferrule and a 0.31-inch outer diameter to minimize leaks and maintain pressure over long runs, ensuring reliable performance in busy bars, restaurants, and service operations. Operators benefit from straightforward installation and durable construction that supports continuous daily use without frequent replacement.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug draft lines and relieve pressure. Remove the 0.31" O.D. metal ferrule and inspect for debris. Scrub fitting with a nylon brush and a mild detergent solution, using warm water measured in liters as needed. Rinse thoroughly and dry with a lint-free cloth. Reassemble fittings hand-tight, then torque per manufacturer specs. Clean weekly to prevent bacterial growth, reduce fire risk from grease, lower energy use, extend equipment life, and meet CSA inspection standards.#@@#Additional Info#@#Micro Matic 786F metal ferrule fits 0.31" O.D. tubing and secures 5/16" O.D. coil connections for draft beer systems; the stainless component ensures sealing, resists corrosion, and supports quick assembly in beverage operations.#@@#General Info#@#Description #@#
Designed for high-throughput draft systems, this coil fitting provides robust connections and consistent flow control for commercial pouring lines. Engineers specified the metal ferrule and a 0.31-inch outer diameter to minimize leaks and maintain pressure over long runs, ensuring reliable performance in busy bars, restaurants, and service operations. Operators benefit from straightforward installation and durable construction that supports continuous daily use without frequent replacement.
#@@# Metal Ferrule#@#
The metal ferrule secures tubing with firm compression, preventing slippage under pressure and reducing the risk of carbonation loss. Service technicians can install the ferrule quickly, and inspectors find fewer failure points during routine checks.
#@@# 0.31 Inch Diameter#@#
A 0.31-inch outer diameter matches common coil tubing sizes, facilitating compatibility with existing draft assemblies and minimizing the need for adapters. Maintenance crews can retain standard inventory and eliminate delays caused by mismatched parts.
#@@# Coil Fitting Design#@#
Engineers shaped the fitting for smooth internal flow, which reduces turbulence and foam formation during dispensing. Line performance improves, and staff experience fewer service interruptions related to pour quality.
#@@# Corrosion-Resistant Metal#@#
Manufacturers constructed the fitting from corrosion-resistant metal, which withstands wet environments and cleaning chemicals used in backbar maintenance. Facility managers can extend service life and avoid premature replacements that disrupt operations.
#@@# Quick Installation#@#
Technicians attach the fitting using standard tools and common procedures, allowing rapid swaps during scheduled downtime. Managers can schedule maintenance windows efficiently and keep draft lines in service with minimal labor.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the Micro Matic 786F ferrule and mating tubing weekly for wear, corrosion, and proper seating to prevent leaks. Clean fittings with a nonabrasive detergent and rinse thoroughly; avoid chlorinated cleaners that accelerate corrosion. Torque connections to manufacturer specifications and replace ferrules showing deformation. Flush lines after maintenance to purge air and contaminants. Document service dates and parts replaced for compliance with CSA and internal audits.
