Keep draft systems flowing without downtime or contamination risk. This clear 3/8 inch tubing delivers consistent flow characteristics for chilled draft lines, reducing pressure variance and preserving product clarity across long runs. Food service operators can install predictable lengths quickly thanks to a straight 1-foot standard that fits common fittings and clamps.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug dispensing lines and drain remaining beer. Flush the Micro Matic 550C 0.38" clear beer line with warm water, then circulate a food-safe cleaning solution per CSA guidelines for recommended contact time. Rinse thoroughly with potable water until no suds remain. Sanitize with approved sanitizer, drain completely, and air-dry before reconnecting. Clean weekly or more often under heavy use to prevent bacterial buildup, grease buildup, and service issues.#@@#Additional Info#@#Micro Matic 550C 0.38" Clear Beer Line offers 1' of 3/8" ID tubing for beverage systems. CSA-compatible materials ensure hygienic transfer, resist kinks, and support reliable flow in bars and kitchens.#@@#General Info#@#Description #@#
Keep draft systems flowing without downtime or contamination risk. This clear 3/8 inch tubing delivers consistent flow characteristics for chilled draft lines, reducing pressure variance and preserving product clarity across long runs. Food service operators can install predictable lengths quickly thanks to a straight 1-foot standard that fits common fittings and clamps.
#@@# Tubing Diameter#@#
A 3/8 inch internal diameter provides controlled flow for most dispense heads in bars and microbreweries, optimizing pour rate and foam control. Technicians achieve repeatable output across runs, simplifying system balancing and reducing pour loss.
#@@# Material Clarity#@#
Clear construction allows visual inspection of product and condensate, enabling rapid detection of blockages or air ingress. Maintenance teams can spot issues without disassembly, shortening service times and lowering labor costs.
#@@# Length Specification#@#
One-foot sections provide modularity for custom routing and easy replacement at service points, eliminating lengthy downtime during repairs. Installers can configure lengths on site to match tower and keg positions, improving system layout efficiency.
#@@# Chemical Compatibility#@#
Manufacturer design supports common cleaning agents used in draft systems, maintaining line integrity during routine sanitation cycles. Operators sustain sanitary performance while avoiding frequent tubing replacement due to chemical attack.
#@@# Connector Compatibility#@#
This section fits standard bar refrigeration fittings and clamps used in commercial dispense assemblies, ensuring secure seals under operating pressures. Facility staff can integrate sections into existing infrastructure without specialized adapters, reducing retrofit complexity.
#@@# Compliance and Traceability#@#
Product originates from a supplier with a longstanding industry presence since 1998 and aligns with commercial draft component expectations and CSA referenced practices.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the Micro Matic 550C beer line weekly for kinks, discoloration, or biofilm. Replace tubing every 6–12 months based on throughput and beverage type. Flush lines with an approved cleaning solution after each keg change, following manufacturer guidelines. Disconnect fittings and sanitize couplers with hot water and sanitizer; dry components before reassembly. Record cleaning cycles and fluid volumes in a maintenance log. Verify ambient temperatures and secure tubing away from sharp edges.
