Mount the unit with 14 inch legs and a 6 inch spacing pattern to integrate with existing serving lines and shelves. Technicians connect to a standard 120v, 1-Ph, 60 Hz supply, simplifying electrical planning for kitchens that operate on common circuits.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug power and allow unit to cool fully. Remove dust from aluminum housing with a soft brush. Wipe exterior with mild detergent and a damp cloth; avoid abrasive pads. Clean tubular metal heater rods gently to preserve finish. Inspect and clear vents and 14" legs for grease build-up; remove with degreaser rated for kitchen use. Check wiring and mounting hardware; tighten loose fasteners. Restore power only after unit is dry and inspections pass.#@@#Additional Info#@#Hatco’s GR2AHL-72D6 Glo-Ray heater delivers 3810 Watts of infrared heat in a 75.5" aluminum housing with 6" spacing. It operates at 120v 1-Ph, mounts on 14" legs, and supports commercial food holding with USA-made heating elements.#@@#General Info#@#Description #@#
Mount the unit with 14 inch legs and a 6 inch spacing pattern to integrate with existing serving lines and shelves. Technicians connect to a standard 120v, 1-Ph, 60 Hz supply, simplifying electrical planning for kitchens that operate on common circuits.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect electrical connections monthly and tighten terminals to prevent arcing. Clean aluminum housing and reflector with a nonabrasive cloth and mild detergent; avoid solvents that degrade finishes. Replace tubular metal heating rods at first sign of filament damage. Verify mounting legs and fasteners remain secure and maintain 6" spacing from product per installation guidelines. Test lights and infrared function quarterly and log volt and amp readings for CSA compliance.
