Groen HY-5E HyperSteam Convection Steamer
Ideal for busy kitchens, the Groen HY-5E HyperSteam Convection Steamer provides efficiency like no other!
The Groen HY-5E HyperSteam Convection Steamer is an electric-heated pressure-less steamer with one (1) compartment. It is capable of holding five (5) 12-inch x 20-inch x 2-1/2-inch pans. Alternatively, it can hold ten (10) 12-inch x 20-inch x 1-inch pans or three (3) 12-inch x 20-inch x 4-inch pans. Made for table top use, the unit has an overall width of 21-5/8 inches, depth of 30-1/8 inches, and height of 22-1/2 inches. It also has a weight of 210 pounds. It features a stackable design, which allows multiple units to be stacked over each other. It is fully constructed with stainless steel—from the cabinet to the steamer cavity.
For easy access to internal components, the Groen HY-5E HyperSteam Convection Steamer is equipped with removable right and left-side panels. To accommodate to any kitchen layout, it also has continuous-hinged door that is field-reversible for right or left-side swing. It is designed with easy-open handle and latch to provide positive lock and seal when the door is pushed or slammed shut as well. To keep the door secured and air-insulated, it is also lined with a one-piece replaceable seal. Additionally, it a hidden magnetic door switch cuts power to the blower and generator whenever the door is opened. This allows a more energy-efficient operation. Moreover, the unit is provided with pan support racks polished with stainless steel. A condensate collection tray of the same material is also positioned under the cavity door.
The Groen HY-5E HyperSteam Convection Steamer showcases a #3 uniform finish for the cabinet exterior including the door. Meanwhile, the cavity interiors present a polished stainless-steel finish. For an attractive and easy to clean control panel, the face plates are made of smudge-resistant polyester film. The controls include an on-off power button and a 60-minute electro-mechanical timer with continuous steam setting. For user convenience, it also has a ready indicator light, which alerts users when the cavity is ready for steaming. Under normal conditions, the heat time up is between 8 to 10 minutes or less. It also has an AutoDelime button with an indicator light to warn operator of deliming.
The Groen HY-5E HyperSteam Convection Steamer is designed with a self-contained, rear-mounted atmospheric steam generator. It provides atmospheric steam with temperature of approximately 212 degrees Fahrenheit. For a safe operation, it is equipped with an electric water sensor to measure the water level. If the water level reaches low, the unit will automatically shut down. Once the power switch is turned off, the steam generator is then automatically blown down to reduce sediment build-up. Additionally, it is crafted with a side-mounted blower. This measures the steam velocity and provides efficient steam. The unit is configured for circuits with specifications of 208 volts, 60 hertz, 3-phase electrical supply. It also requires an input of 15.5 kilowatts and 44 amps per usage. It delivers a power input of 3.1 kilowatts per 2-1/2-inch deep steam pan. It is made for dual water connection.
LongDescription#@#NA#@@#Cleaning Instructions#@#To clean the exterior cabinet of the Groen HY-5E HyperSteam Convection Steamer, use a soft cloth soaked in a warm solution of mild detergent. Be careful not to wet the controls, control panel, any electrical panel, or any open louver. To remove dirt and other foreign materials stuck to the unit, you may use a plastic wool, a fiber brush, or similar cleaning material instead. Apply a detergent solution and gently rub the spot that needs to cleaned. Meanwhile, the steamer cavity and steam generator may be cleaned separately. Regular deliming must be done depending on steamer usage and local water quality. To do this, simply follow the deliming instructions provided on the manufacturer’s manual.#@@#Additional Info#@#The Groen HY-5E HyperSteam Convection Steamer holds approval from the following: cUL, UL, and NSF. It is made in USA.#@@#General Info#@#Groen HY-5E HyperSteam Convection Steamer
Ideal for busy kitchens, the Groen HY-5E HyperSteam Convection Steamer provides efficiency like no other!
The Groen HY-5E HyperSteam Convection Steamer is an electric-heated pressure-less steamer with one (1) compartment. It is capable of holding five (5) 12-inch x 20-inch x 2-1/2-inch pans. Alternatively, it can hold ten (10) 12-inch x 20-inch x 1-inch pans or three (3) 12-inch x 20-inch x 4-inch pans. Made for table top use, the unit has an overall width of 21-5/8 inches, depth of 30-1/8 inches, and height of 22-1/2 inches. It also has a weight of 210 pounds. It features a stackable design, which allows multiple units to be stacked over each other. It is fully constructed with stainless steel—from the cabinet to the steamer cavity.
For easy access to internal components, the Groen HY-5E HyperSteam Convection Steamer is equipped with removable right and left-side panels. To accommodate to any kitchen layout, it also has continuous-hinged door that is field-reversible for right or left-side swing. It is designed with easy-open handle and latch to provide positive lock and seal when the door is pushed or slammed shut as well. To keep the door secured and air-insulated, it is also lined with a one-piece replaceable seal. Additionally, it a hidden magnetic door switch cuts power to the blower and generator whenever the door is opened. This allows a more energy-efficient operation. Moreover, the unit is provided with pan support racks polished with stainless steel. A condensate collection tray of the same material is also positioned under the cavity door.
The Groen HY-5E HyperSteam Convection Steamer showcases a #3 uniform finish for the cabinet exterior including the door. Meanwhile, the cavity interiors present a polished stainless-steel finish. For an attractive and easy to clean control panel, the face plates are made of smudge-resistant polyester film. The controls include an on-off power button and a 60-minute electro-mechanical timer with continuous steam setting. For user convenience, it also has a ready indicator light, which alerts users when the cavity is ready for steaming. Under normal conditions, the heat time up is between 8 to 10 minutes or less. It also has an AutoDelime button with an indicator light to warn operator of deliming.
The Groen HY-5E HyperSteam Convection Steamer is designed with a self-contained, rear-mounted atmospheric steam generator. It provides atmospheric steam with temperature of approximately 212 degrees Fahrenheit. For a safe operation, it is equipped with an electric water sensor to measure the water level. If the water level reaches low, the unit will automatically shut down. Once the power switch is turned off, the steam generator is then automatically blown down to reduce sediment build-up. Additionally, it is crafted with a side-mounted blower. This measures the steam velocity and provides efficient steam. The unit is configured for circuits with specifications of 208 volts, 60 hertz, 3-phase electrical supply. It also requires an input of 15.5 kilowatts and 44 amps per usage. It delivers a power input of 3.1 kilowatts per 2-1/2-inch deep steam pan. It is made for dual water connection.#@@#Delivery Details#@#• Upon receiving your Groen HY-5E HyperSteam Convection Steamer, carefully inspect it for shipping damages. If any damages are found, kindly make a claim about it with the freight carrier and have the product marked as “damaged” on their copy of the freight bill.
• Lift and transport the unit with two or more persons. Use of a lift gate is recommended if a loading dock is not available.
• To avoid drainage problems, place the unit over a level surface from front to back.
• For proper operation, do not block the right or left-side vents. Also, provide at least 12 inches of distance between the unit and any heat source.#@@#deliverynotes#@#The Groen HY-5E HyperSteam Convection Steamer is usually shipped within # business days after receiving cleared payment.#@@#Maintenance Guide#@#The Groen HY-5E HyperSteam Convection Steamer is designed for minimum maintenance. To keep it in its best condition for a long time, simply observe proper use and care. Also, regularly check the door gasket for leaks. For repair and service works, kindly contact the manufacturer for authorized personnel.