Groen BPM-30GC Braising Pan
Enhance your braising and griddling tasks with the powerful and highly sanitary Groen BPM-30GC Braising Pan.
To ensure superior durability and strength, the Groen BPM-30GC Braising Pan is constructed from solid, one-piece welded, 304 stainless steel. The cooking surface features a 5/8-inch thick, warp and distortion resistant stainless steel clad plate with meticulously welded heat transfer fins heated by a gas burner or combustion chamber. The combination of the plate and ergonomic fins facilitate an even heat distribution over the entire cooking surface. The tilt mechanism and classic controls are mounted in an IPX6-rated, water resistant stainless steel housing at the right side of the pan body.
The Groen BPM-30GC Braising Pan has a smooth-action, quick tilting body easily controlled for content pouring through a manual crank and worm-and-gear tilt mechanism. It tilts vertically in 24 turns and extends past vertical to facilitate proper cleaning. The true open leg tubular design and 3-inch radius pan interior ensure that every surface of the pan is easily accessible for proper sanitation. Height-adjustable bullet feet keep the unit steady even during intense operations and cleaning.
Quality components ensure that the Groen BPM-30GC Braising Pan enhances users’ culinary experience. Exceptional griddling is guaranteed through controls that enable operations at a 7-degree angle. The unit is fully equipped with a power ON-OFF switch with indicator light, a heating indicator light, and a temperature knob with 175 degrees to 400 degrees Fahrenheit (79 degrees to 204 degrees Celsius) range increments. To promote safe and accurate cooking, automated thermostatic controls with high safety limits turn off when the ideal temperature is met and turns back on when the temperature goes below your requirement.
The Groen BPM-30GC Braising Pan exhibits an impressive firing rate of 104,000 BTU/hour and is powered by an electronic intermittent pilot ignition system. It requires a 1/2-inch NPT gas connection and a 115 Volts/60 Hertz/1-Phase (5 Amp) electric supply. It is ergonomically designed for use with either Natural Gas or Liquid Propane Gas. Its capacity of 30 gallons is enhanced by a standard faucet bracket (for right-side, left-side, or rear faucet mounting) and graduated level marks in both gallon and liter metrics. It features a 100 emery grit interior finish, a no. 3 exterior polish, and stainless steel construction for its exposed surfaces.
LongDescription#@#NA#@@#Cleaning Instructions#@#Make sure to clean the Groen BPM-30GC Braising Pan after every use. Using a sponge/soft dishcloth and warm soapy water (preferably mixed with a degreasing substance), clean every surface and edge thoroughly. Please take care not to get the gas burner/combustion chamber and other critical components wet. Keep wiping until all the grease and food particles are gone.
To maintain the luster of its stainless steel finish, do not use abrasive objects or cleaners with high chemical concentration. Take advantage of the pan’s tilting property to drain the cooking surface of any substance. Rinse, wipe down, and thoroughly dry the unit after cleaning. To ensure optimal sanitation for this unit, kindly refer to the manual/literature for the complete cleaning procedures.#@@#Additional Info#@#The Groen BPM-30GC Braising Pan is NSF and CSA International certified. Please specify the gas type before ordering this equipment. Kindly make sure to specify the altitude before placing an order for this unit. Gas Feed Rate (recommended incoming): Natural Gas – 4.5 inches W.C. minimum, 14 inches W.C. maximum; Propane Gas – 11 inches W.C. minimum, 14 inches W.C. maximum.#@@#General Info#@#Groen BPM-30GC Braising Pan
Enhance your braising and griddling tasks with the powerful and highly sanitary Groen BPM-30GC Braising Pan.
To ensure superior durability and strength, the Groen BPM-30GC Braising Pan is constructed from solid, one-piece welded, 304 stainless steel. The cooking surface features a 5/8-inch thick, warp and distortion resistant stainless steel clad plate with meticulously welded heat transfer fins heated by a gas burner or combustion chamber. The combination of the plate and ergonomic fins facilitate an even heat distribution over the entire cooking surface. The tilt mechanism and classic controls are mounted in an IPX6-rated, water resistant stainless steel housing at the right side of the pan body.
The Groen BPM-30GC Braising Pan has a smooth-action, quick tilting body easily controlled for content pouring through a manual crank and worm-and-gear tilt mechanism. It tilts vertically in 24 turns and extends past vertical to facilitate proper cleaning. The true open leg tubular design and 3-inch radius pan interior ensure that every surface of the pan is easily accessible for proper sanitation. Height-adjustable bullet feet keep the unit steady even during intense operations and cleaning.
Quality components ensure that the Groen BPM-30GC Braising Pan enhances users’ culinary experience. Exceptional griddling is guaranteed through controls that enable operations at a 7-degree angle. The unit is fully equipped with a power ON-OFF switch with indicator light, a heating indicator light, and a temperature knob with 175 degrees to 400 degrees Fahrenheit (79 degrees to 204 degrees Celsius) range increments. To promote safe and accurate cooking, automated thermostatic controls with high safety limits turn off when the ideal temperature is met and turns back on when the temperature goes below your requirement.
The Groen BPM-30GC Braising Pan exhibits an impressive firing rate of 104,000 BTU/hour and is powered by an electronic intermittent pilot ignition system. It requires a 1/2-inch NPT gas connection and a 115 Volts/60 Hertz/1-Phase (5 Amp) electric supply. It is ergonomically designed for use with either Natural Gas or Liquid Propane Gas. Its capacity of 30 gallons is enhanced by a standard faucet bracket (for right-side, left-side, or rear faucet mounting) and graduated level marks in both gallon and liter metrics. It features a 100 emery grit interior finish, a no. 3 exterior polish, and stainless steel construction for its exposed surfaces.#@@#Delivery Details#@#• The Groen BPM-30GC Braising Pan might require two or more persons to lift it.
• Please use a lift gate in case a loading dock is not available.
• Inspect the Groen BPM-30GC Braising Pan thoroughly for any damage or missing components before signing the delivery receipt.
• Make sure to install the braising pan at a location with adequate clearances to make it accessible for cleaning, maintenance, and repair.
• Installation must be done by an authorized personnel qualified to work with gas and electric connections. Failure to properly install this unit could be hazardous and lead to extensive damage.
• The Groen BPM-30GC Braising Pan is for commercial use only and must never use home or residential grade gas connections as they have not been evaluated for commercial codes and are possibly dangerous.
• The braising pan must not be connected to a power source unless you are certain that it matches the electrical specifications found in the owner’s manual.
• The installation instructions written in the manufacturer’s manual/specification literature must be strictly followed.#@@#deliverynotes#@#Culinary Depot normally ships the Groen BPM-30GC Braising Pan in # business days of your payment being received and cleared.#@@#Maintenance Guide#@#Prior to any maintenance attempt, make sure that the Groen BPM-30GC Braising Pan is properly turned off and disconnected from the power source. Allow the unit to cool down significantly before approaching it with cleaning implements. Do not subject the pan to intense heat, especially when there is no liquid in it.
If you detect strange, gaseous odors or any quality that is contradictory to what is found in the manufacturer’s literature, turn off the gas and the entire unit, then contact all authorized service personnel away from the area. For your safety and the enhanced longevity of this equipment, please make sure to adhere strictly to the manual/literature for all maintenance concerns.