Stop sacrificing hand hygiene for space. This wall-mounted hand sink delivers a compact, code-ready solution that fits tight footprints while meeting institutional sanitation demands. Installers and facility managers will appreciate the efficient footprint and NSF certification that support compliance in restaurants, schools, hospitals, and bars.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug nearby power, remove debris, and flush sink with warm water. Mix mild detergent at recommended dilution, scrub bowl and flange with a non-abrasive pad, then rinse thoroughly. Sanitize food-contact surfaces using a CSA-approved sanitizer per label, allow contact time, and air dry. Clean faucet and splash mount hardware; inspect seals and tighten fittings. Schedule weekly coil and vent degrease to reduce fire risk and extend equipment life.#@@#Additional Info#@#Eagle Group HSA-10 wall-mounted hand sink measures 13-1/2" W x 9-3/4" front-to-back with a 6-3/4" deep bowl, made from 304 stainless steel, features seamless construction, inverted V edge, positive drain, NSF certification, and weighs 10 pounds.#@@#General Info#@#Description #@#
Stop sacrificing hand hygiene for space. This wall-mounted hand sink delivers a compact, code-ready solution that fits tight footprints while meeting institutional sanitation demands. Installers and facility managers will appreciate the efficient footprint and NSF certification that support compliance in restaurants, schools, hospitals, and bars.
#@@# Bowl Dimensions#@#
The sink features a 13.5-inch left-to-right bowl width and a 9.75-inch front-to-back bowl depth, providing a usable 6.75-inch deep bowl for effective handwashing and splash control. Designers and planners will value the measured capacity of 2.8 gallons, which balances water retention for rapid rinsing without excessive pooling.
#@@# Stainless Steel Construction#@#
Manufacturers formed the bowl from 304 stainless steel using a deep-drawn seamless process to eliminate creases and welds that trap soil. Facility staff gain a corrosion-resistant surface that withstands frequent cleaning and harsh detergents while maintaining sanitary conditions.
#@@# Positive Drain Design#@#
Engineers incorporated a positive drain with an inverted V edge to promote complete drainage and reduce standing water, limiting microbial growth and simplifying daily sanitation. Maintenance crews will find fewer clogs and faster dry times, which lengthen the interval between intensive cleanings.
#@@# Wall-Mount Configuration#@#
The unit installs as a wall-mounted sink, freeing floor space and simplifying cleaning beneath the fixture in high-traffic kitchens and service areas. Contractors receive straightforward mounting parameters that suit busy back-of-house layouts and compact compliance sinks.
#@@# Faucet Requirement#@#
The fixture requires a splash-mounted faucet, allowing operators to select a faucet style and control appropriate to local codes and operational preferences. Procurement teams can pair the sink with metered, manual, or sensor faucets to meet touchless or conservation goals.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the Eagle Group HSA-10 hand sink weekly for leaks, loose fasteners, and damaged seals. Clean the 304 stainless steel bowl and splash panels daily with mild detergent and warm water; rinse and dry to prevent spots. Descale faucets and aerators monthly with vinegar to maintain flow; remove debris and reassemble. Sanitize surfaces after heavy use with an EPA-registered sanitizer per label directions. Verify wall mount anchors and supply lines quarterly; tighten fittings as needed.