Engineers designed this remote outdoor walk-in freezer to support high-throughput cold storage while minimizing energy use and field assembly time. Modular panels arrive factory fabricated with poured-in-place rigid polyurethane insulation to ensure consistent thermal performance for prolonged operational cycles. Operators will find installation straightforward, with systems ready for immediate commissioning to support continuous service loads.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug power and lock out circuits before cleaning. Remove debris and wash panels with mild detergent and a soft cloth. Rinse with clean water and dry to prevent ice buildup. Clean condenser coils monthly to improve efficiency. Scrub floor with a non-abrasive cleaner; rinse and disinfect food-contact surfaces. Inspect door gaskets and hinges; replace worn seals. Keep drains clear to prevent clogs and microbial growth.#@@#Additional Info#@#Dade Engineering FO-8167.7-R remote outdoor walk-in freezer measures 92.4" H x 96" W. It uses 4" rigid polyurethane panels with R-32 walls, R-28 floor, and 26-gauge galvanized steel surfaces.#@@#General Info#@#Description #@#
Engineers designed this remote outdoor walk-in freezer to support high-throughput cold storage while minimizing energy use and field assembly time. Modular panels arrive factory fabricated with poured-in-place rigid polyurethane insulation to ensure consistent thermal performance for prolonged operational cycles. Operators will find installation straightforward, with systems ready for immediate commissioning to support continuous service loads.
#@@# Panel Insulation#@#
4-inch rigid polyurethane insulation yields targeted thermal resistance, with freezer walls, ceilings, and doors rated at R-32 and freezer floors at R-28, delivering predictable heat transfer control in ambient conditions up to 100°F. Designers specified these values to reduce compressor run time and protect stored product quality.
#@@# Structural Surfaces#@#
26-gauge acrylic-coated stucco galvanized steel covers both inner and outer panel faces to resist corrosion and simplify cleaning in outdoor installations. Production teams specified a textured .080 aluminum interior floor that supports uniform loads up to 700 pounds per square foot, ensuring safe storage of palletized goods.
#@@# Entrance Components#@#
A single flush-mount self-closing swing door measures 36 inches by 78 inches and includes adjustable backing plates for on-site hinge alignment and two spring-loaded cam-lift hinges for smooth operation. The door pairs hydraulic closures, an interior safety release, a deadbolt lock, magnetic gaskets, and adjustable vinyl wipers to maintain thermal integrity and user safety.
#@@# Refrigeration System#@#
Technicians supply a remote condensing system assembled in a mill-finish aluminum housing, factory wired, piped, evacuated, charged, and run-tested for reliable start-up. Unit selection meets DOE minimum AWEF requirements for medium temperature applications and ships with R-448A refrigerant and components rated for ambient operation to 100°F.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect gasket integrity weekly and replace any cracked sections to maintain thermal seal and reduce energy loss. Clean condenser coils monthly with a soft brush and vacuum to preserve efficiency. Drain and clear condensate lines biweekly to prevent ice buildup. Verify door alignment and adjust hinges quarterly for proper closure. Lubricate hinge pivot points annually with food-grade lubricant. Monitor refrigerant charge and head pressures during seasonal load changes to sustain performance.
