Stop sacrificing resilience for capacity. This outdoor self-contained walk-in freezer delivers engineered thermal control and field-ready durability, ensuring operations maintain consistent 0°F storage without interruption. Food service managers gain a modular, high-insulation solution designed for heavy use, while technicians find a system primed for rapid installation and reliable service life.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the unit and remove all product. Mix mild detergent with warm water and wipe interior panels, ceiling and door seals with a soft cloth. Brush condenser coils and vacuum debris to maintain efficiency. Scrub textured aluminum floor with non-abrasive cleaner; rinse and dry. Inspect magnetic gaskets and replace worn seals. Clear drainlines and test defrost cycle. Clean vents and grease buildup to reduce fire risk and bacterial growth. Reconnect power after unit is fully dry.#@@#Additional Info#@#Dade Engineering FO-687.7-SC outdoor walk-in freezer measures 92.4" H x 72" W x 96" D, operates on 208/230 volts, uses R-448A refrigerant, and has AWEF ≥7.61. It features 4" polyurethane panels, a 36" x 78" swing door, and ships pre-wired and tested.#@@#General Info#@#Description #@#
Stop sacrificing resilience for capacity. This outdoor self-contained walk-in freezer delivers engineered thermal control and field-ready durability, ensuring operations maintain consistent 0°F storage without interruption. Food service managers gain a modular, high-insulation solution designed for heavy use, while technicians find a system primed for rapid installation and reliable service life.
#@@# Rigid Insulation#@#
Four-inch rigid polyurethane panels provide focused thermal protection and minimize heat transfer across the envelope. Designers specified R-32 for freezer walls, ceilings, and doors, and R-28 for freezer floors to support sustained 0°F performance under high load conditions.
#@@# Certified Modular Panels#@#
Prefabricated modular panels arrive engineered for precise on-site assembly, reducing labor time and minimizing measurement errors. Fabrication adheres to DOE walk-in specifications and Dade Coolers® architectural guides to ensure code-compliant construction.
#@@# Exterior Finish#@#
The outer and inner surfaces use 26 gauge acrylic-coated stucco galvanized steel to resist corrosion and maintain a consistent exterior under outdoor exposure. Field technicians will appreciate the uniform finish that simplifies cleaning and supports long-term asset presentation.
#@@# Floor Load Capacity#@#
Textured .080 aluminum floor panels support a uniformly distributed load of up to 700 pounds per square foot, allowing storage racks and pallet traffic without structural compromise. Facilities can confidently stage heavy goods while preserving floor integrity.
#@@# Self-Contained Refrigeration#@#
The outdoor condensing system ships fully charged, piped, evacuated, and run-tested, enabling straightforward mounting atop the unit and rapid commissioning. Engineers meet DOE minimum AWEF ratings of 7.61 Btu/W-h for medium-temperature systems and specify R-404A refrigerant, with components sized for compartments up to 13 feet 6 inches.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect condenser fins weekly; remove debris with a soft brush for efficiency. Drain and clean evaporator and condensate trays monthly; treat drains with enzymatic cleaner to prevent clogs. Check door magnetic gaskets and replace if compression drops to prevent air infiltration. Verify floor panels for corrosion and fastenings every three months; tighten loose screws to preserve capacity. Calibrate thermostat quarterly and log temperature readings twice daily.
