Stop sacrificing thermal control for capacity. This industrial walk-in freezer combines robust insulation, purpose-built refrigeration, and a serviceable design to deliver consistent low-temperature storage for high-demand foodservice operations. Facilities that require reliable frozen storage under continuous use will find predictable performance, energy data, and installation flexibility in this unit.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug power and empty the freezer. Remove shelves and sweep loose debris. Wash interior panels and door gaskets with mild soap and warm water; rinse and dry. Clean condenser coils monthly with a soft brush to maintain efficiency and lower energy use. Remove grease from vents and surrounding surfaces to reduce fire risk. Sanitize food-contact areas with EPA-approved sanitizer. Inspect seals, hinges and drainlines; repair or replace worn parts to avoid breakdowns and failed inspections.#@@#Additional Info#@#Dade Engineering FI-8167.7-R remote indoor walk-in freezer measures 92.4" H x 96" W, uses 208/230 volts, and features 4" rigid polyurethane panels, 26-gauge galvanized steel surfaces, and a self-closing door.#@@#General Info#@#Description #@#
Stop sacrificing thermal control for capacity. This industrial walk-in freezer combines robust insulation, purpose-built refrigeration, and a serviceable design to deliver consistent low-temperature storage for high-demand foodservice operations. Facilities that require reliable frozen storage under continuous use will find predictable performance, energy data, and installation flexibility in this unit.
#@@# Rigid Polyurethane Panels#@#
Four-inch thick rigid polyurethane fills every panel to establish the thermal envelope. Designers specified R-32 for freezer walls, ceilings, and doors, and R-28 for freezer floors, translating into measurable thermal resistance and lower load on refrigeration during steady-state operation.
#@@# 26 Gauge Coated Steel#@#
Outer and inner skins use 26 gauge acrylic-coated stucco galvanized steel to provide a corrosion-resistant shell that supports frequent cleaning protocols. Maintenance crews will appreciate the durable finish that resists surface damage and sustains hygienic conditions.
#@@# Textured Aluminum Floor#@#
Floor panels feature textured aluminum at .080 thickness, engineered to carry a uniformly distributed load of up to 700 pounds per square foot. Operations that stage heavy racks or pallet loads can plan placement and traffic patterns around this rated capacity.
#@@# Self-Closing Door Assembly#@#
A single flush-mount self-closing swing door measures 36 inches by 78 inches and includes hydraulic closure, interior safety release, deadbolt lock, magnetic gaskets, and adjustable vinyl wiper gaskets. Staff will gain secure access while minimizing infiltration and energy loss, with documented kWh/day values for coolers and freezers to aid energy accounting.
#@@# Remote Condensing Refrigeration#@#
The system uses dedicated outdoor condensing units configured to meet the DOE minimum AWEF requirement of 7.61 for medium temperature applications and ships fully wired, piped, evacuated, and charged.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect door gaskets weekly; replace torn or compressed seals to maintain thermal performance. Clean condenser coils monthly with a vacuum or brush for heat transfer efficiency. Sanitize interior surfaces with neutral detergent and warm water; avoid abrasive cleaners that harm 26-gauge acrylic-coated stucco galvanized steel. Ensure floor panels are level and secure to support 700 pounds per square foot. Record temperatures daily and service refrigeration if variance exceeds 3°F.
