Stop compromising thermal performance for speed. This remote indoor walk-in freezer delivers engineered insulation, robust construction, and factory-tested refrigeration systems to support rigorous food service and institutional workflows. Designed for heavy daily use, this unit balances energy considerations with operational durability to meet production demands effectively.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug power and empty the freezer. Scrape loose ice and debris, then wash interior with a mild soap solution and a soft cloth. Rinse with clean water and dry all surfaces thoroughly. Clean condenser coils and evaporator grilles monthly to maintain efficiency. Remove grease from vents and oven areas to reduce fire risk. Inspect door gaskets and hinges; replace worn seals. Log each cleaning to meet CSA and health inspection records.#@@#Additional Info#@#Dade Engineering’s FI-687.7-R remote indoor walk-in freezer is 92.4" H x 72" W, using 4" rigid polyurethane panels (R-32 walls/ceilings/doors, R-28 floor) with 26-gauge steel facings.#@@#General Info#@#Description #@#
Stop compromising thermal performance for speed. This remote indoor walk-in freezer delivers engineered insulation, robust construction, and factory-tested refrigeration systems to support rigorous food service and institutional workflows. Designed for heavy daily use, this unit balances energy considerations with operational durability to meet production demands effectively.
#@@# Rigid Insulation#@#
Panels incorporate 4-inch rigid polyurethane poured in place to provide consistent thermal resistance. Engineers specified R-32 for walls, ceilings, and doors, and R-28 for floors to maintain low-temperature stability at -10ºF with minimal temperature fluctuation.
#@@# Galvanized Steel Finish#@#
Outer and inner surfaces use 26-gauge acrylic-coated stucco galvanized steel for corrosion resistance and ease of cleaning. Technicians designed the finish to withstand frequent sanitation and reduce long-term maintenance interruptions.
#@@# Heavy-Duty Floor#@#
Floor panels use textured aluminum at .080 thickness and support uniformly distributed loads up to 700 pounds per square foot. Facility planners can place substantial storage racks and equipment without requiring structural reinforcement.
#@@# Self-Closing Door#@#
A single flush-mount self-closing swing door features hydraulic closure, a deadbolt-locking handle, an interior safety release, and magnetic and vinyl gaskets to minimize infiltration. Operators will benefit from lower energy loss and safer access during high-traffic service periods.
#@@# Factory-Ready Refrigeration#@#
Systems arrive fully wired, piped, evacuated, charged, and run-tested with mill-finish aluminum housings for condensing units and evaporators. Technicians can mount condensers outdoors and connect to remote indoor evaporators configured for compartments up to 13 feet 6 inches in length.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect condenser coils monthly; remove dust and debris with a soft brush or vacuum to maintain efficiency. Schedule quarterly gasket inspections; replace damaged magnetic and vinyl gaskets to preserve seal integrity. Clean interior surfaces with a mild alkaline cleaner and rinse with potable water; avoid abrasive pads that scratch 26-gauge acrylic-coated steel. Verify floor bolts and panel joints for tightness; reseal gaps with FDA-compliant silicone.
