Stop sacrificing storage integrity for quick installation. This self-contained indoor walk-in cooler delivers consistent 35°F temperature control while offering a 270 cubic foot capacity and an engineered floor rated for heavy loads, enabling operations to maintain product quality at scale. Equipment designers and facility managers will appreciate that the refrigeration system arrives fully charged, run-tested, and ready for mounting, minimizing installation time and commissioning risk.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the unit and remove contents. Use a mild detergent and a soft cloth to clean interior panels and aluminum floor; rinse and dry completely. Vacuum condenser coils and remove grease from evaporator fins with a soft brush. Clean door gaskets and replace if cracked. Degrease vents and oven surfaces to prevent fires. Check seals and thermostat calibration. Regular cleaning reduces bacteria, lowers energy use, and prevents costly failures.#@@#Additional Info#@#Dade Engineering CI-667.7-SC walk-in cooler is 92.4" H x 72" W x 72" D with 270 cu. ft. capacity. It features 4" rigid polyurethane panels, 26-gauge galvanized steel, and a self-contained refrigeration system.#@@#General Info#@#Description #@#
Stop sacrificing storage integrity for quick installation. This self-contained indoor walk-in cooler delivers consistent 35°F temperature control while offering a 270 cubic foot capacity and an engineered floor rated for heavy loads, enabling operations to maintain product quality at scale. Equipment designers and facility managers will appreciate that the refrigeration system arrives fully charged, run-tested, and ready for mounting, minimizing installation time and commissioning risk.
#@@# Insulated Paneling#@#
Four-inch rigid polyurethane panels provide primary thermal resistance with R-25 for cooler walls, ceilings, and doors, ensuring steady thermal performance under continuous operation. Designers will note that poured-in-place foam bonds to 26-gauge acrylic-coated stucco galvanized steel skins, which limits thermal bridging and supports predictable energy use.
#@@# Load Bearing Floor#@#
Textured aluminum floor panels with .080 thickness support a uniformly distributed load up to 700 pounds per square foot, safeguarding heavy racks and high-density storage arrays. Operations staff benefit from a durable walking surface that resists deformation while simplifying sanitation and floor-level equipment placement.
#@@# Pre-Assembled Refrigeration#@#
The self-contained refrigeration system ships as a fully wired, piped, evacuated, and optimally charged condensing unit and evaporator coil, reducing field plumbing and wiring scope. Maintenance teams gain clarity because manufacturers test each unit and provide mill-finish aluminum housings that mount directly to the unit, reducing downtime during installation.
#@@# Compliance And Efficiency#@#
Systems meet the DOE minimum AWEF rating of 7.61 Btu/W-h for medium temperature applications and use R-448A refrigerant to balance efficiency with regulatory requirements.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Perform weekly inspections of gasket integrity and door hardware to prevent air leaks and cooling loss. Clean condenser coils monthly with a soft brush and low-pressure water; disconnect power before servicing. Sanitize interior surfaces quarterly with food-safe detergent, rinse, and dry to prevent corrosion of the 26-gauge acrylic-coated stucco galvanized steel panels. Verify floor panels for load distribution and repair damaged sections to preserve the .080 textured aluminum finish.
