Low lead compliant construction meets regulatory requirements, while NSF certification confirms suitability for food service environments. Purchasing agents secure a code-compliant fixture that supports institutional safety programs and enhances operational efficiency.
LongDescription#@#Encore® Workboard Faucet, deck mount, 4" (102mm) OC inlets, 8-1/2" (216mm) stainless steel swivel gooseneck spout, 1/4-turn full volume compression valves, 4" wrist blade handles, 2.2 gpm aerated stream aerator, low lead compliant, NSF#@@#Cleaning Instructions#@#Unplug nearby equipment and shut water at the valve before cleaning. Remove handles and aerator; soak in a mild detergent solution for 10 minutes. Scrub the 8-1/2" stainless gooseneck spout and body with a soft cloth and non-abrasive cleaner to remove grease and biofilm. Rinse thoroughly with potable water and dry with a lint-free towel. Reassemble parts and restore water. Clean weekly to prevent bacteria buildup, reduce fire risk from grease, lower energy use, and avoid costly breakdowns.#@@#Additional Info#@#Component Hardware KL41-4001-SE4 workboard faucet has 4" centers, 8.5" stainless steel swivel spout, 1/4-turn valves with 4" handles, 2.2 gpm aerated stream, low lead compliant, and CSA/NSF certified.#@@#General Info#@#Description #@#
Low lead compliant construction meets regulatory requirements, while NSF certification confirms suitability for food service environments. Purchasing agents secure a code-compliant fixture that supports institutional safety programs and enhances operational efficiency.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the KL41-4001-SE4 deck mount faucet weekly for leaks and mineral buildup around the gooseneck spout. Remove aerator monthly and soak in vinegar solution to restore a 2.2 gpm aerated stream. Lubricate compression valve stems quarterly with NSF-approved silicone grease and tighten packing nuts to prevent drips. Verify 4" centers and wrist blade handle operation; replace worn seals immediately. Flush lines after installation to clear debris and confirm ADA and CSA compliance.
