At approximately 6 pounds, the assembly balances sturdiness with manageable handling during installation. Install crews complete replacements more efficiently and transport costs remain modest.
LongDescription#@#Top-Line® Universal Lever Handle Waste Outlet, 1-1/2" NPT female, 2" NPT male, 3-1/2" sink opening, 4-3/8" self-centering flange, flat snap-in stainless steel strainer, 10-1/2" stainless steel lever handle, overflow outlet, 1-1/4" overflow assembly, stainless steel#@@#Cleaning Instructions#@#Remove debris from the sink opening and unplug any strainers. Disassemble the Top-Line lever waste outlet and soak stainless parts in a mild detergent solution for 10–15 minutes. Scrub threads and seals with a soft brush; avoid abrasive pads. Rinse with clean water and dry thoroughly. Inspect the 1-1/2" and 2" NPT connections, tighten per torque specs, and replace worn gaskets. Clean overflow and test lever action before returning to service.#@@#Additional Info#@#Component Hardware D15-7515-R universal lever waste fits 3.5" sink openings with 1-1/2" NPT female and 2" NPT male drain outlets. It has a stainless steel construction, a 4-3/8" flange, snap-in strainer, 10-1/2" lever handle, and overflow assembly.#@@#General Info#@#Description #@#
At approximately 6 pounds, the assembly balances sturdiness with manageable handling during installation. Install crews complete replacements more efficiently and transport costs remain modest.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the D15-7515-R lever waste valve weekly for debris and secure connections. Remove the flat snap-in strainer monthly and flush with warm, soapy water; rinse and dry before reinstalling. Lubricate the stainless steel lever handle quarterly with food-safe lubricant to prevent binding. Verify overflow assembly and seals every six months and replace worn gaskets. Record maintenance dates and parts replaced to support CSA inspections.
