Stop compromising cold storage performance for convenience. This indoor walk-in cooler provides consistent 35°F operation with a top-mounted, self-contained refrigeration system sized for 90°F ambient conditions, enabling reliable temperature control in high-demand food service environments. Facility managers will appreciate the unit made in the USA with UL and NSF certifications and a robust construction that supports heavy daily use.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the unit and remove all stored product. Mix a mild detergent with warm water (do not exceed 2 gallons) and wipe interior panels, floor, and door gaskets with a soft cloth. Scrub condenser coils weekly using a brush and vacuum to remove dust and grease. Sanitize food-contact surfaces with an NSF-approved sanitizing solution, then air dry. Inspect seals and hinges for wear; tighten or replace fasteners as needed. Clean vents and exhausts monthly to reduce fire risk and improve efficiency.#@@#Additional Info#@#AmeriKooler’s QC061077**FBSC indoor cooler measures 120" W x 72" D x 91" H, has 4" AK-XPS4 panels with R-29 insulation, Acrylume surfaces, a 600 lbs/sq. ft. aluminum floor, 3/4 HP R-448A refrigeration, LED thermometer, and UL/CSA certifications.#@@#General Info#@#Description #@#
Stop compromising cold storage performance for convenience. This indoor walk-in cooler provides consistent 35°F operation with a top-mounted, self-contained refrigeration system sized for 90°F ambient conditions, enabling reliable temperature control in high-demand food service environments. Facility managers will appreciate the unit made in the USA with UL and NSF certifications and a robust construction that supports heavy daily use.
#@@# Acrylume Finish#@#
Engineers applied 26 gauge stucco embossed Acrylume to all interior and exterior surfaces to resist corrosion and simplify cleaning. Procurement teams receive long service life and reduced finish maintenance compared with standard painted panels.
#@@# Panel Insulation#@#
Designers specified 4 inch AK-XPS4 panels delivering R-29 for coolers and R-32 for freezers to minimize thermal loss. Operations staff gain faster pull-down and lower compressor cycling, which reduces energy draw during peak service hours.
#@@# Load Rated Floor#@#
Manufacturers installed an NSF aluminum floor rated at 600 pounds per square foot of uniformly distributed load to support racks and heavy ingredient storage. Kitchen planners can position full racks and pallet loads without risking floor deflection or damage.
#@@# Self Closing Door#@#
The flush self-closing door pairs with super cam-rise spring assisted hinges and an integrated door closer to maintain internal temperature when staff move product. Managers observe fewer temperature excursions and improved product shelf life due to consistent door sealing.
#@@# Refrigeration Package#@#
The 3/4 HP, top-mounted refrigeration unit uses R-448A and operates on 208/230 volts, 60 hertz, single phase to match commercial electrical infrastructure. Technicians benefit from simplified service access and standardized replacement parts for faster repairs.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect condenser coils weekly and remove debris to maintain heat transfer efficiency. Schedule gasket checks monthly; replace seals showing cracks or compression loss. Calibrate the digital LED thermometer quarterly and verify pilot light function. Drain and sanitize the NSF aluminum floor monthly using food-safe disinfectant; allow full drying before reuse. Lubricate door hinges and cam-rise springs every six months. Log maintenance actions and parts replaced for CSA and UL compliance.