Stop sacrificing storage integrity for convenience. This indoor walk-in cooler delivers controlled temperatures, robust construction, and service-ready performance for high-volume foodservice operations. Designed and built in the USA since 1998, this unit supports continuous use in cafeterias, hospitals, restaurants, and hospitality facilities.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the cooler and remove all stock. Mix mild detergent in warm water (use gallons or liters as needed) and wipe interior panels and floor with a soft cloth. Clean condenser coils monthly; brush loose debris then vacuum gently to improve efficiency and lower bills. Degrease door hinges and seals; inspect seals for cracks and replace when compromised to prevent breakdowns. Sanitize food-contact surfaces with an NSF-approved solution and dry completely before powering on.#@@#Additional Info#@#AmeriKooler QC060677**FBSC walk-in cooler is 72" W x 72" D x 91" H with 4" AK-XPS4 panels for R-29 insulation, 26-gauge stucco aluminum, 600 lbs/sq. ft. floor, self-closing door, LED thermometer, and a 1/2 HP R-448A system rated at 35°F.#@@#General Info#@#Description #@#
Stop sacrificing storage integrity for convenience. This indoor walk-in cooler delivers controlled temperatures, robust construction, and service-ready performance for high-volume foodservice operations. Designed and built in the USA since 1998, this unit supports continuous use in cafeterias, hospitals, restaurants, and hospitality facilities.
#@@# Dimensions And Capacity#@#
Manufacturers specify a nominal footprint of 6 feet by 6 feet with a nominal height of 7 feet 7 inches, yielding efficient usable volume for bulk product staging. Designers configured the interior to accept standard commercial racks and pallets, enabling organized storage and faster stock rotation.
#@@# Insulation Performance#@#
Engineers incorporated 4-inch AK-XPS4 panels that provide R-29 for cooler applications and R-32 for freezer service, reducing thermal gain and cutting refrigeration runtime. Facility managers observe steadier internal temperatures and lower compressor cycling when ambient loads remain within rated limits.
#@@# Durable Surface Finish#@#
Specifiers selected 26-gauge stucco embossed Acrylume on exterior and interior surfaces to resist corrosion and retain a cleanable profile under heavy traffic. Maintenance teams find wipe-downs straightforward, and finish wear is minimal over regular cleaning cycles.
#@@# Floor Load Capacity#@#
The design includes an NSF aluminum floor rated at 600 pounds per square foot uniformly distributed, allowing safe placement of heavy equipment and dense inventory. Kitchen planners can place shelving, crates, or mechanical carts without structural concern.
#@@# Door And Hinge System#@#
The equipment uses a flush self-closing door with super cam-rise spring-assisted hinges and a door closer to maintain seal integrity and minimize air infiltration during service peaks. Operators notice faster recovery after door openings and reduced product temperature variance.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect condenser coils weekly; remove dust with a soft brush and low-pressure vacuum for efficiency. Lubricate hinges and door closer monthly with food-safe lubricant to prevent wear. Verify digital LED thermometer calibration quarterly; record temperatures to confirm 35°F operation. Tighten electrical connections yearly; inspect refrigeration lines for frost or oil stains indicating leaks. Clean interior Acrylume surfaces with mild detergent and a soft cloth.